MHE 5 (600148620) Chipping Hammer

Plastic Carry Case

MHE 5 (600148620) Chipping Hammer
Order no.: 600148620 EAN: 4061792199248
Max. single blow energy (EPTA):
7.1 J
Amps:
9.6 AMPS
Maximum impact rate:
3000 BPM
Rated input power:
1100 W
Bit retainer:
SDS-max
  • Metabo VibraTech (MVT): integrated damping system to reduce vibrations in order to protect the user's health
  • Vario-Constamatic (VC)-Full wave electronics for working at customized impact rates to suit the application materials, and speeds that remain almost constant even under load
  • Thumbwheel for preselection of impact rate
  • Electronic soft start for smooth start-up
  • Lockable switch for trouble-free chiseling in continuous operation
  • The service display, for example, indicates when the carbon brush needs to be replaced, plus an LED indicating mains voltage
  • Early warning system with service LED for targeted planning of carbon brush exchanges 8 working hours before shutoff
Additional product information
 Shop Online
Instruction manual Replacement parts list
  • Metabo VibraTech (MVT): integrated damping system to reduce vibrations in order to protect the user's health
  • Vario-Constamatic (VC)-Full wave electronics for working at customized impact rates to suit the application materials, and speeds that remain almost constant even under load
  • Thumbwheel for preselection of impact rate
  • Electronic soft start for smooth start-up
  • Restart protection: prevents unintentional start-up after power supply interruption
  • Optimum heat dissipation and low weight thanks to magnesium die cast gear housing
  • Lockable switch for trouble-free chiseling in continuous operation
  • The service display, for example, indicates when the carbon brush needs to be replaced, plus an LED indicating mains voltage
  • Early warning system with service LED for targeted planning of carbon brush exchanges 8 working hours before shutoff
  • The adjustable front handle can be rotated 360° and the angle adjusted for an optimum working position
The machine shown may differ in equipment and technical details depending on the configuration.
Kindly pay attention to delivery scope and product description.
Accessories included only if listed in the delivery scope.
Parameters
Max. single blow energy (EPTA)
7.1 J
Amps
9.6 AMPS
Maximum impact rate
3000 BPM
Rated input power
1100 W
Bit retainer
SDS-max
Weight (without power cable)
5.7 kg
Cable length
19.685 ft
Vibration
Chiseling
12.3 m/s²
Uncertainty of measurement K
1.5 m/s²
Noise emission
Sound pressure level
95 dB(A)
Sound power level (LwA)
105 dB(A)
Uncertainty of measurement K
1.67 dB(A)
  • Front handle
  • Lubricant for tool shank end
  • Duster
  • Plastic carrying case
 
Metabo uses cookies in order to optimize and continually improve the design of our website. By continuing to use our website, you consent to the use of cookies. More information