KFMPB 15-10 F (601755620) Bevelling tool

Metal Carry Case

Order no.: 601755620 EAN: 4007430298447
Rated input power:
1500 W
Max. chamfer height at 45°:
3/8 "
  • Metal Bevelling tool for chamfer heights up to 10mm for weld seam preparation with maximum user safety using a deadman switch and braking system
  • One-touch controller: Patented, tool-free setting of the cutting depth in 0.1" steps; stop points for short setting times, and protection against unintentional adjustment of the cutting depth when working
  • Precise setting of chamfer angle directly using the guide plate
  • Universal carbide burr with three carbide inserts for all chamfer angles from 0-90°
  • Metal Bevelling tool for chamfer heights up to 10mm for weld seam preparation with maximum user safety using a deadman switch and braking system
  • One-touch controller: Patented, tool-free setting of the cutting depth in 0.1" steps; stop points for short setting times, and protection against unintentional adjustment of the cutting depth when working
  • Precise setting of chamfer angle directly using the guide plate
  • Universal carbide burr with three carbide inserts for all chamfer angles from 0-90°
  • Controlled work with large-surface guide plates
  • Stop roller to guide along pipes for easy weld seam preparation
  • Bail handle adjusts without tools for secure, even guiding
  • Metabo Long-life motor with patented dust protection for long service life
  • Tacho-Constamatic (TC)-Full Wave Electronics: fast work progress by means of constant speed under load
  • Patented mechanical braking system stops the carbide burr within 2 seconds after switching off
  • Electronic overload protection, soft start and restart protection
  • Protection for users with metal sheet sides to deflect chips
Parameters
No-load speed
12500 RPM
Amps
13 AMPS
Rated input power
1500 W
Output power
840 W
Max. chamfer width at 45°
9/16 "
Max. chamfer height at 45°
3/8 "
Grade cutting depth setting
0.1 "
2 15/16 "
Weight (without power cable)
11.2 lbs
Cable length
157 1/2 ft
Noise emission
Sound pressure level
91 dB(A)
Sound power level (LwA)
102 dB(A)
Uncertainty of measurement K
3 dB(A)
  • Stopper roller
  • Screwdriver Torx 15
  • Screwdriver SW 4 with T-handle
  • Open-Ended Spanner SW 10
  • Side Handle
  • Metal carrying case
Metabo uses cookies in order to optimize and continually improve the design of our website. By continuing to use our website, you consent to the use of cookies. More information