KFM 9-3 RF (601751750) Bevelling tool

MetaLoc

Order no.: 601751750 EAN: 4007430293428
Rated input power:
900 W
Max. chamfer height at 45°:
5/32 "
Possible radii:
R2 / R3
  • Compact metal beveling tool for 45° chamfers and radii of 2 to 3 mm at visible edges
  • Surfaces free from oxide and burrs as ideal preparation for the application of powder or paint coatings for maximum protection from corrosion
  • One-touch controller: Patented, tool-free setting of the cutting depth in 0.1" steps; stop points for short setting times, and protection against unintentional adjustment of the cutting depth when working
  • Slim cutter head with standard carbide indexable inserts and ball-bearing stationary seal ring for working in tubes and in curves
  • Guide stop for uniform finish and high quality of the surface when processing straight sheets
  • Compact metal beveling tool for 45° chamfers and radii of 2 to 3 mm at visible edges
  • Surfaces free from oxide and burrs as ideal preparation for the application of powder or paint coatings for maximum protection from corrosion
  • One-touch controller: Patented, tool-free setting of the cutting depth in 0.1" steps; stop points for short setting times, and protection against unintentional adjustment of the cutting depth when working
  • Slim cutter head with standard carbide indexable inserts and ball-bearing stationary seal ring for working in tubes and in curves
  • Guide stop for uniform finish and high quality of the surface when processing straight sheets
  • Metabo Long-life motor with patented dust protection for long service life
  • Constamatic (C)-Full wave electronics: fast work progress by means of almost constant speed under load
  • Electronic safety shutdown of the motor for safe working in case the tool stops unexpectedly
  • Electronic overload protection, soft start and restart protection
  • Slim housing for ideal handling
Parameters
No-load speed
11500 RPM
Amps
8 AMPS
Rated input power
900 W
Output power
470 W
Max. chamfer width at 45°
1/4 "
Max. chamfer height at 45°
5/32 "
Possible radii
R2 / R3
Grade cutting depth setting
0.004 "
13 mm
Weight (without power cable)
5.5 lbs
Cable length
13 ft
Noise emission
Sound pressure level
87 dB(A)
Sound power level (LwA)
98 dB(A)
Uncertainty of measurement K
3 dB(A)
  • 2 Carbide indexable inserts 45° chamfer (ISO: DCMT 11 T 304)
  • 2 Carbide indexable inserts radius R2
  • 2 Carbide indexable inserts radius R3
  • Guide fence
  • Screwdriver Torx 15
  • Side handle Metabo VibraTech (MVT)
  • MetaLoc case
Metabo uses cookies in order to optimize and continually improve the design of our website. By continuing to use our website, you consent to the use of cookies. More information