KHEV 8-45 BL (600766620) 1 25/32" Combination hammer

Plastic Carry Case

Order no.: 600766620 EAN: 4061792002623
Max. single blow energy (EPTA):
12.2 J
Amps:
14.8 AMPS
Maximum impact rate:
2900 BPM
Rated input power:
1500 W
Max. capacity in concrete with hammer drills:
1 25/32 "
Bit retainer:
SDS-max
  • Maximum drilling progress and good demolition performance thanks to brushless motor and high-performance hammer action
  • Long service life thanks to brushless technology and robust cast aluminum housing for drive unit and motor
  • Metabo VibraTech (MVT) with double damping: decoupled handle and impact-absorbing oscillating weight reduce active vibrations for safe work, even with long-term use.
  • Low-dust chiseling and drilling with external ESA max dust extraction (accessories)
  • Maximum drilling progress and good demolition performance thanks to brushless motor and high-performance hammer action
  • Long service life thanks to brushless technology and robust cast aluminum housing for drive unit and motor
  • Combination hammer with 2 functions: hammer drilling, drilling, and chiseling
  • Metabo VibraTech (MVT) with double damping: decoupled handle and impact-absorbing oscillating weight reduce active vibrations for safe work, even with long-term use.
  • Ergonomically shaped, slim handle with large speed control trigger for comfortable work
  • Easy to reach locking switch for chiseling in continuous mode
  • Vario-Tacho-Constamatic (VTC)-Full Wave Electronics for working at customized speeds to suit the application material and speeds that remain almost constant, even under load
  • Optional speed and impact energy reduction for working on softer materials
  • Electronic soft start for precise spot-drilling
  • Metabo S-automatic torque limiting clutch: mechanical decoupling of the drive for safe working should the drill stop unexpectedly.
  • Restart protection: prevents unintentional start-up after power supply interruption
  • Overload protection: protects the motor from overheating
  • Low-dust chiseling and drilling with external ESA max dust extraction (accessories)
The machine shown may differ in equipment and technical details depending on the configuration.
Kindly pay attention to delivery scope and product description.
Accessories included only if listed in the delivery scope.
Parameters
Max. single blow energy (EPTA)
12.2 J
Amps
14.8 AMPS
Maximum impact rate
2900 BPM
Rated input power
1500 W
Max. capacity in concrete with hammer drills
1 25/32 "
Max. capacity in masonry with core bits
4 15/16 "
No-load speed
210 / 300 RPM
Revolutions at rated load
210 / 300 RPM
Bit retainer
SDS-max
Collar diameter
3 5/32 "
Weight (without power cable)
22.3 lbs
Cable length
236 7/32 ft
Vibration
Hammer drilling concrete
12.2 m/s²
Uncertainty of measurement K
1.5 m/s²
Chiseling
10.4 m/s²
Uncertainty of measurement K
1.5 m/s²
Noise emission
Sound pressure level
94 dB(A)
Sound power level (LwA)
105 dB(A)
Uncertainty of measurement K
3 dB(A)
  • rubber-coated handle
  • Lubricant for tool shank end
  • Duster
  • Plastic carrying case
 
Metabo uses cookies in order to optimize and continually improve the design of our website. By continuing to use our website, you consent to the use of cookies. More information