• Diamond drill bits

Diamond drill bits

Diamond drill bits for tiles "Dry", 6 mm, M14 (628300000)
Diamond drill bits for tiles "Dry", M14
  • M14 Thread for use on angle grinders
  • Long service life and fast drilling progress thanks to vacuum hard soldered diamonds
  • Easy removal of the drill core thanks to lateral recesses
  • No extra cooling required. For Ø 6-14 mm an additional paraffin emulsion is integrated for improved cooling. We recommend to briefly cool the tip with water in case of drilling in quick succession!
  • We recommend using the thickness of the tile / fine earthenware / granite board as useful length. As a rule, max. 2 cm granite boards / work boards up to 5 cm can be drilled. Retract the drill bit often from the drilled hole so that it can cool down!
  • Important: Do not drill into the subsurface in case of laid material!
  • Maximum working speed: 80 m/s
Diameter Overall length Sales unit Order no.
6 mm 64 mm 1 628300000
8 mm 64 mm 1 628301000
10 mm 64 mm 1 628302000
12 mm 64 mm 1 628303000
14 mm 64 mm 1 628304000
18 mm 91 mm 1 628305000
20 mm 91 mm 1 628306000
25 mm 91 mm 1 628307000
32 mm 91 mm 1 628308000
35 mm 91 mm 1 628309000
40 mm 91 mm 1 628310000
50 mm 91 mm 1 628311000
55 mm 91 mm 1 628312000
60 mm 91 mm 1 628313000
68 mm 91 mm 1 628314000
75 mm 91 mm 1 628315000
82 mm 91 mm 1 628316000
45 mm 91 mm 1 628318000
Diamond drill bit set for tiles "Dry", M14
Order no.
Diamond drill bit set for tiles "Dry" 7 pieces, M14 (628317000)
  • M14 Thread for use on angle grinders
  • Long service life and fast drilling progress thanks to vacuum hard soldered diamonds
  • Easy removal of the drill core thanks to lateral recesses
  • No extra cooling required. For Ø 6-14 mm an additional paraffin emulsion is integrated for improved cooling. We recommend to briefly cool the tip with water in case of drilling in quick succession!
  • We recommend using the thickness of the tile / fine earthenware / granite board as useful length. As a rule, max. 2 cm granite boards / work boards up to 5 cm can be drilled. Retract the drill bit often from the drilled hole so that it can cool down!
  • Important: Do not drill into the subsurface in case of laid material!
  • Maximum working speed: 80 m/s
  • Set consisting of: each 1 x Ø 6 mm, 8 mm, 14 mm, 35 mm, 40 mm, 50 mm, 68 mm;

628317000