Bevelling tools
BEVELLING TOOLS FOR WELD SEAM PREPARATION - MORE PRODUCTIVE THAN EVER.
ACHIEVE PERFECT WORK RESULTS FASTER, SAFER AND MORE ECONOMICALLY.
A new dimension for more productive working, faster work processes and more precise results. Ideal for use when preparing weld seams for all common chamfer angles from 0 - 90°, when processing flat material and pipes. The KFM 16-15 F tackles a chamfer height up to 15 mm at 45°.
The most productive: KFM 16-15 F
The most universal: KFM 15-10 F
The safest: KFMPB 15-10 F
Convincing cost benefits
5x more edges processed in the same period of time
Maximum cost benefit by means of an infinitely adjustable mitre fence
- One cutter head for all chamfer angles from 0 - 90 °
- No additional cutter heads required to achieve multiple angles
- Infinitely adjustable
Precise chamfer angles for optimal welding results
More precise than working with an angle grinder
- Surfaces without oxide and burrs, or blue discolouration of the material due to heat generation
- No unintentional adjustment of the cutting depth thanks to fixed stop points (patented one-touch controller)
- Constant uniform chamfer angles and depth thanks to large surface mitre fence
With bevelling tool
With angle grinder
Various application areas
Possible chamfer heights (h) / width (b) at 45°
Easy operation thanks to patented one-touch controller
- Adjustment of the cutting depth without tools at steps of 0.1 mm
- Integrated stop points for fast operation against unintentional adjustment of the cutting depth when working
Possible edges
Straight edge on the flat material
Processing of pipes from an outer Ø of 75 mm with stop roller
COMPACT BEVELLING TOOLS: HIGHEST PRECISION AND PRODUCTIVITY.
PERFECT WORK RESULTS: EASIER, FASTER, AND MORE ECONOMICAL.
Compact bevelling tools for 45° chamfers and radii from 2 to 3 mm at visible edges. Whether mains or battery-powered - they are ideally suited for breaking and rounding of drilled and punched edges, chamfering of pipes and the deburring of sheet metal with plenty of contours.
High surface quality - precise work results
- Uniform surfaces without additional reworking
- Perfect radii of edges for optimal coating preparation
- Filigree deburring of straight sheet metal
Optimal work preparation for the powder / lacquer coating at edges
Processing of edges with a bevelling tool:
- Perfectly rounded edges R2 / R3
- Uniform coating -->best protection from corrosion
Without edge processing:
- Irregular coating (irregular lines) -->Risk of corrosion
Convincing cost benefits
Maximum cost benefit thanks to universal milling head
- One milling head for 45° chamfers and radii R2 / R3
- Only the carbide indexable inserts need to be changed
Quick and easy operation thanks to patented one-touch controller
- Tool-free cutting depth setting in 0.1 mm steps
- Integrated stop points for fast operation and protection against unintentional adjustment of the cutting depth while working
Various application areas
Straight edges
Processing of straight edges with guide stop from just 2 mm sheet thickness
Curves / outer contours
Processing of curves with stationary seal ring, from just 4 mm sheet thickness
Drilled holes / inside contours
Processing of inner Ø and drilled holes with stationary seal ring from 4 mm sheet thickness
Smallest inner Ø: 13 mm
