SBE 751 (600863620) Impact Drill

Plastic Carry Case

Order no.: 600863620 EAN: 4007430199638
Rated input power:
750 W
Maximum torque:
30 / 13 Nm // 266 / 115 in-lbs
Drill-Ø concrete:
20 mm / 3/4 "
Drill Ø steel:
13 / 8 mm // 1/2 / 0.315 "
Drill-Ø soft wood:
40 / 25 mm // 1 5/8 / 1 "
No-load speed:
0 - 1000 / 0 - 3100 rpm
  • Vario (V)-Electronics for working at customised speeds to suit various application materials
  • Robust die cast aluminium gear housing for optimum heat dissipation and long service life
  • Metabo Longlife-motor with dust protection for long service life
  • Metabo S-automatic safety clutch: mechanical decoupling of the drive for safe working should the tool stop unexpectedly
  • Vario (V)-Electronics for working at customised speeds to suit various application materials
  • Robust die cast aluminium gear housing for optimum heat dissipation and long service life
  • Rotating carbon brush bridge for maximum performance even in anti-clockwise operation, e.g. for the removal of stubborn screws
  • Metabo Longlife-motor with dust protection for long service life
  • Metabo S-automatic safety clutch: mechanical decoupling of the drive for safe working should the tool stop unexpectedly
  • Forward and reverse rotation
  • Spindle with hexagonal recess for screwdriver bits for working without chuck
  • Cable-protecting ball joint for optimal freedom of motion when working
The machine shown may differ in equipment and technical details depending on the configuration.
Kindly pay attention to delivery scope and product description.
Accessories included only if listed in the delivery scope.
Characteristics
Rated input power
750 W
Output power
450 W
Maximum torque
30 / 13 Nm // 266 / 115 in-lbs
Drill-Ø concrete
20 mm / 3/4 "
Drill Ø steel
13 / 8 mm // 1/2 / 0.315 "
Drill-Ø soft wood
40 / 25 mm // 1 5/8 / 1 "
No-load speed
0 - 1000 / 0 - 3100 rpm
Revolutions at rated load
600 / 1800 rpm
Maximum impact rate
59000 bpm
Gears
2
Chuck capacity
1 - 13 mm // 1/32 - 1/2 "
Collar diameter
43 mm / 1 11/16 "
Drill spindle with hexagonal recess
6.35 mm / 1/4 "
Drill spindle thread
1/2 " - 20 UNF
Chuck clamping type
Geared Chucks
Weight (without power cable)
2.7 kg / 6 lbs
Cable length
4 m / 13 ft
Vibration
Drilling in metal
4 m/s²
Uncertainty of measurement K
1.5 m/s²
Impact drilling concrete
18 m/s²
Uncertainty of measurement K
1.5 m/s²
Noise emission
Sound pressure level
100 dB(A)
Sound power level (LwA)
111 dB(A)
Uncertainty of measurement K
3 dB(A)
  • Geared Chucks
  • Drilling depth guide
  • Plastic carry case
  • Chuck Keys
  • rubber-coated side handle