Non-impact-proof chucks
- Keyless clamping of insertion tools to hand-held and fixed drilling machines
- The chuck readjusts its tension to match the increasing cutting pressure on the cutting bit
- The chuck can be opened easily by hand even after the toughest drilling jobs
- For maximum load
- For clockwise rotating drills only
- Not impact-proof
Clamping width | Female thread | Outer Ø | Length (closed) | Weight | Order no. |
---|---|---|---|---|---|
1 - 10 mm | 3/8" - 24 UNF | 37.5 mm | 77 mm | 0.35 kg | 636321000 |
1 - 10 mm | 1/2" - 20 UNF | 37.5 mm | 77 mm | 0.35 kg | 636322000 |
1 - 13 mm | 3/8" - 24 UNF | 40.5 mm | 89 mm | 0.6 kg | 636341000 |
1 - 13 mm | 1/2" - 20 UNF | 40.5 mm | 89 mm | 0.6 kg | 636342000 |
1 - 13 mm | B16 | 40.5 mm | 103 mm | 0.6 kg | 636343000 |
1 - 13 mm | 1/2" - 20 UNF | 47.5 mm | 111 mm | 0.8 kg | 636351000 |
1 - 13 mm | B16 | 47.5 mm | 111 mm | 0.8 kg | 636353000 |
3 - 16 mm | 5/8" - 16 UN | 50 mm | 113 mm | 1 kg | 636361000 |
3 - 16 mm | B16 | 50 mm | 113 mm | 1 kg | 636362000 |
3 - 16 mm | B18 | 50 mm | 113 mm | 1 kg | 636363000 |
- Specially developed for cordless and lightweight drills
- Plastic sleeve
- Double sleeve with supporting ring for firm grip of tools
- Keyless for quick tool change
- Not impact-proof
- Drills through using locking screw for clockwise and anti-clockwise operating machines
- With spanner flat for assembly and disassembly
- Special design for drills with spindle stop
- Plastic sleeve
- Single sleeve without supporting ring
- Keyless for quick tool change
- Not impact-proof
- Drills through using locking screw for clockwise and anti-clockwise operating machines
- With spanner flat for assembly and disassembly