UHEV 2860-2 Quick (600713590) Multi Hammer

(220-240 V / 50 - 60 Hz); metaBOX 145 L; with Metabo Quick change chuck

Order no.: 600713590 EAN: 4007430309570
Max. single blow energy (EPTA):
3.4 J
Maximum impact rate:
4500 bpm
Rated input power:
1100 W
Drill-Ø concrete with hammer drills:
28 mm
Bit retainer:
SDS-plus
  • Multi hammer with 4 functions: hammer drilling, drilling without impact in two speeds and chiselling
  • Metabo Quick: quick change between SDS Plus hammer chuck and keyless chuck for drilling in wood and metal
  • Vario-Tacho-Constamatic (VTC)-Full Wave Electronics for work with materials requiring customised speeds, which remain constant under load
  • Two-speed gear unit: two drilling speeds for effective drilling in wood and metal
  • Metabo S-automatic safety clutch: mechanical decoupling of the drive for safe working should the drill stop unexpectedly
  • Restart protection: prevents unintentional start-up after power supply interruption
  • Multi hammer with 4 functions: hammer drilling, drilling without impact in two speeds and chiselling
  • Metabo Quick: quick change between SDS Plus hammer chuck and keyless chuck for drilling in wood and metal
  • Vario-Tacho-Constamatic (VTC)-Full Wave Electronics for work with materials requiring customised speeds, which remain constant under load
  • Thumbwheel for preselection of the speed and impact rate
  • Two-speed gear unit: two drilling speeds for effective drilling in wood and metal
  • Metabo Marathon-motor with dust protection for long service life
  • High performance hammer action, precisely mounted in a housing made of aluminium alloy: long-lasting and robust
  • Perfect ergonomics thanks to the centre of gravity being near the hand and optimised handle contour
  • Bottom switch protected against damage and dust
  • Metabo S-automatic safety clutch: mechanical decoupling of the drive for safe working should the drill stop unexpectedly
  • Restart protection: prevents unintentional start-up after power supply interruption
  • Lockable switch for comfortable working in continuous operation
  • Cable-protecting ball joint for optimal freedom of motion when working
  • With metaBOX, the intelligent solution for transport and storage
The machine shown may differ in equipment and technical details depending on the configuration.
Kindly pay attention to delivery scope and product description.
Accessories included only if listed in the delivery scope.
Characteristics
Max. single blow energy (EPTA)
3.4 J
Maximum impact rate
4500 bpm
Rated input power
1100 W
Drill-Ø concrete with hammer drills
28 mm
Drill-Ø masonry with core bits
68 mm
Drill Ø steel
13 / 6 mm
Drill-Ø soft wood
35 / 30 mm
No-load speed
0 - 900 / 0 - 2100 rpm
Revolutions at rated load
900 / 2100 rpm
Bit retainer
SDS-plus
Collar diameter
50 mm
Weight (without power cable)
3.3 kg
Cable length
4 m
Vibration
Drilling in metal
4.3 m/s²
Uncertainty of measurement K
1.5 m/s²
Hammer drilling concrete
13.5 m/s²
Uncertainty of measurement K
1.5 m/s²
Chiseling
7.2 m/s²
Uncertainty of measurement K
1.5 m/s²
Noise emission
Sound pressure level
90 dB(A)
Sound power level (LwA)
99 dB(A)
Uncertainty of measurement K
3 dB(A)
  • Hammer chuck for tools with SDS-plus shank end
  • Keyless chuck for tools with cylindrical shank
  • rubber-coated side handle
  • Drilling depth guide
  • metaBOX 145 L
Full service - Complete protection for full cost control
Full service price group FS4
One-time cost for 36 months (RRP incl. VAT) 109.00 £

The full service benefits:

  • All repairs within 3 years are fully covered, even repairs of wear and tear
  • Free theft protection




This Full Service Package provides all-round protection thanks to fairly calculated service flat rates.
When purchasing the machine buy a full service code from your dealer.
Using this code you can register your machine for the full service within 4 weeks from the date of purchase.

Register at www.metabo-service.com
More information at www.metabo.com/services