EURO Plug-in nipple 1/4"
ARO/Orion Plug-in nipple 1/4"
ISO Plug-in nipple 1/4"
2 collets (3 mm, 6 mm)
5 mounted points each (3 mm, 6 mm)
2 open-jawed spanners (13 mm, 16 mm)
Plastic carry case
Air die grinder
DG 25 Set (604116500) Air die grinder
Order no.: 604116500
Your Delivery Scope
EURO Plug-in nipple 1/4"
ARO/Orion Plug-in nipple 1/4"
ISO Plug-in nipple 1/4"
- 6.2 barOperating pressure
- 25000 rpmMaximum speed
- For sanding/grinding, deburring, moulding/routing and engraving
- Integrated speed control
- Ergonomic, partially rubber-coated housing: cold-insulating, non-slip and low vibration for comfortable work
- Safety lever for protection against accidental start up
- Rotatable exhaust guide at the side of the housing.
| Operating pressure | 6.2 bar |
| Air requirement | 300 l/min |
| Maximum speed | 25000 rpm |
| Collet chuck bore | 6 mm |
| Weight | 0.43 kg |
| Surface grinding | 0.1 m/s² |
| Uncertainty of measurement K | 0.8 m/s² |
| Sound pressure level | 75 dB(A) |
| Sound power level (LwA) | 87 dB(A) |
| Uncertainty of measurement K | 3 dB(A) |
| EURO Plug-in nipple 1/4" |
| ARO/Orion Plug-in nipple 1/4" |
| ISO Plug-in nipple 1/4" |
| 2 collets (3 mm, 6 mm) |
| 5 mounted points each (3 mm, 6 mm) |
| 2 open-jawed spanners (13 mm, 16 mm) |
| Plastic carry case |
Accessory
Categories 1
44 out of 44 possible accessories
