KFMPB 15-10 F (601755620) Metal Bevelling Tool

metaBOX 280 L

KFMPB 15-10 F (601755620) Metal Bevelling Tool
Order no.: 601755620 EAN: 4007430298447
Amps:
13 AMPS
Rated input power:
1500 W
Max. chamfer height at 45°:
3/8 "
  • Metal Bevelling tool for chamfer heights up to 10mm for weld seam preparation with maximum user safety using a deadman switch and braking system
  • One-touch controller: Patented, tool-free setting of the cutting depth in 0.1" steps; stop points for short setting times, and protection against unintentional adjustment of the cutting depth when working
  • Precise setting of chamfer angle directly using the guide plate
  • Universal carbide burr with three carbide inserts for all chamfer angles from 0-90°
Additional product information
 Shop Online
Instruction manual Replacement parts list
  • Metal Bevelling tool for chamfer heights up to 10mm for weld seam preparation with maximum user safety using a deadman switch and braking system
  • One-touch controller: Patented, tool-free setting of the cutting depth in 0.1" steps; stop points for short setting times, and protection against unintentional adjustment of the cutting depth when working
  • Precise setting of chamfer angle directly using the guide plate
  • Universal carbide burr with three carbide inserts for all chamfer angles from 0-90°
  • Controlled work with large-surface guide plates
  • Stop roller to guide along pipes for easy weld seam preparation
  • Bail handle adjusts without tools for secure, even guiding
  • Metabo Long-life motor with patented dust protection for long service life
  • Tacho-Constamatic (TC)-Full Wave Electronics: fast work progress by means of constant speed under load
  • Patented mechanical braking system stops the carbide burr within 2 seconds after switching off
  • Electronic overload protection, soft start and restart protection
  • Protection for users with metal sheet sides to deflect chips
  • With metaBOX, the smart solution for transportation and storage
The machine shown may differ in equipment and technical details depending on the configuration.
Kindly pay attention to delivery scope and product description.
Accessories included only if listed in the delivery scope.
Parameters
No-load speed
12500 RPM
Amps
13 AMPS
Rated input power
1500 W
Output power
840 W
Type of edges
Chamfer
Chamfer angle
0 - 90 °
Max. chamfer width 45°
9/16 "
Max. chamfer height at 45°
3/8 "
Grade cutting depth setting
0.00394 "
Curvature smallest exterior Ø
2 15/16 "
Weight (without power cable)
11.2 lbs
Cable length
13 ft
Vibration
Vibration
2.5 m/s²
Uncertainty of measurement K
1.5 m/s²
Noise emission
Sound pressure level
91 dB(A)
Sound power level (LwA)
102 dB(A)
Uncertainty of measurement K
3 dB(A)
  • 3 Carbide indexable inserts universal
  • Stopper roller
  • Screwdriver for Torx screws 15
  • Screwdriver SW 4 with T-handle
  • Open-Ended Spanner SW 10
  • Bow type handle
  • metaBOX 280 L
 
Metabo uses cookies in order to optimize and continually improve the design of our website. By continuing to use our website, you consent to the use of cookies. More information