KHE 5-40 (600687420) 1 9/16" Combination hammer

Plastic Carry Case

Order no.: 600687420 EAN: 4007430259172
Max. single blow energy (EPTA):
7.5 J
Maximum impact rate:
3200 BPM
Rated input power:
1010 W
Max. capacity in concrete with hammer drills:
1 9/16 "
Bit retainer:
SDS-max
  • Combination hammer chuck for hammer drilling and chiseling.
  • Metabo VibraTech (MVT): integrated damping system and side handle to reduce vibrations in order to protect the user's health
  • Vario-Tacho-Constamatic (VTC)-Full Wave Electronics for working at customized speeds to suit the application material and speeds that remain almost constant, even under load
  • Thumbwheel for Speed Preselection and Impact Rate
  • Electronic soft start for precise spot-drilling
  • Metabo S-automatic torque limiting clutch: mechanical decoupling of the drive for safe working should the drill stop unexpectedly.
  • Wear indication for carbon brushes
  • Combination hammer chuck for hammer drilling and chiseling.
  • Metabo VibraTech (MVT): integrated damping system and side handle to reduce vibrations in order to protect the user's health
  • Vario-Tacho-Constamatic (VTC)-Full Wave Electronics for working at customized speeds to suit the application material and speeds that remain almost constant, even under load
  • Thumbwheel for Speed Preselection and Impact Rate
  • Electronic soft start for precise spot-drilling
  • Optimum heat dissipation and low weight thanks to magnesium die cast gear housing
  • Metabo S-automatic torque limiting clutch: mechanical decoupling of the drive for safe working should the drill stop unexpectedly.
  • Wear indication for carbon brushes
Parameters
Max. single blow energy (EPTA)
7.5 J
Amps
10.3 AMPS
Maximum impact rate
3200 BPM
Rated input power
1010 W
Max. capacity in concrete with hammer drills
1 9/16 "
Max. capacity in masonry with core bits
3 9/16 "
No-load speed
200 - 350 RPM
Torque
841 in-lbs
Bit retainer
SDS-max
Collar diameter
2 3/8 "
Weight (without power cable)
13.7 lbs
Cable length
13 ft
Vibration
Hammer drilling concrete
13.5 m/s²
Uncertainty of measurement K
1.5 m/s²
Chiseling
11.5 m/s²
Uncertainty of measurement K
1.5 m/s²
Noise emission
Sound pressure level
95 dB(A)
Sound power level (LwA)
106 dB(A)
Uncertainty of measurement K
3 dB(A)
  • Metabo VibraTech (MVT) side handle
  • Drilling depth guide
  • Lubricant for tool shank end
  • Duster
  • Plastic carrying case
Metabo uses cookies in order to optimize and continually improve the design of our website. By continuing to use our website, you consent to the use of cookies. More information