MHE 5 (600688420) Chipping hammer

Plastic Carry Case

Order no.: 600688420 EAN: 4007430259141
Max. single blow energy (EPTA):
8.6 J
Maximum impact rate:
3000 BPM
Rated input power:
1300 W
Bit retainer:
SDS-max
  • Metabo VibraTech (MVT): integrated damping system to reduce vibrations in order to protect the user's health
  • Vario-Tacho-Constamatic (VTC)-Full Wave Electronics for working at customised impact rates to suit the application material remain almost constant, even under load
  • Thumbwheel for preselection of impact rate
  • Electronic soft start for smooth start-up
  • Lockable switch for trouble-free chiseling in continuous operation
  • Metabo VibraTech (MVT): integrated damping system to reduce vibrations in order to protect the user's health
  • Vario-Tacho-Constamatic (VTC)-Full Wave Electronics for working at customised impact rates to suit the application material remain almost constant, even under load
  • Thumbwheel for preselection of impact rate
  • Electronic soft start for smooth start-up
  • Optimum heat dissipation and low weight thanks to magnesium die cast gear housing
  • Lockable switch for trouble-free chiseling in continuous operation
  • The service display, for example, indicates when the carbon brush needs to be replaced, plus an LED indicating mains voltage
  • The adjustable front handle can be rotated 360° and the angle adjusted for an optimum working position
Parameters
Max. single blow energy (EPTA)
8.6 J
Amps
12.5 AMPS
Maximum impact rate
3000 BPM
Rated input power
1300 W
Bit retainer
SDS-max
Weight (without power cable)
14.6 lbs
Cable length
13 ft
Vibration
Chiseling
12.7 m/s²
Uncertainty of measurement K
1.5 m/s²
Noise emission
Sound pressure level
84 dB(A)
Sound power level (LwA)
98 dB(A)
Uncertainty of measurement K
1.9 dB(A)
  • Front handle
  • Lubricant for tool shank end
  • Duster
  • Plastic carrying case