UHEV 2860-2 Quick (600713620) 1 3/32" Multi-hammer

Plastic Carry Case

Order no.: 600713620 EAN: 4007430307767
Max. single blow energy (EPTA):
3.4 J
Maximum impact rate:
4500 BPM
Rated input power:
1100 W
Max. capacity in concrete with hammer drills:
1 3/32 "
Bit retainer:
SDS-plus
  • Multi-hammer for hammer drilling, drilling without impact in two speeds and chiseling
  • Metabo Quick: Quick change between SDS Plus hammer chuck and keyless chuck for drilling in wood and metal
  • Vario-Tacho-Constamatic (VTC)-Full Wave Electronics for working at customized speeds to suit the application material and speeds that remain almost constant, even under load
  • Two-speed gear unit: two drilling speeds for effective drilling in wood and metal
  • Metabo S-automatic torque limiting clutch: mechanical decoupling of the drive for safe working should the drill stop unexpectedly.
  • Restart protection: prevents unintentional start-up after power supply interruption
  • Multi-hammer for hammer drilling, drilling without impact in two speeds and chiseling
  • Metabo Quick: Quick change between SDS Plus hammer chuck and keyless chuck for drilling in wood and metal
  • Vario-Tacho-Constamatic (VTC)-Full Wave Electronics for working at customized speeds to suit the application material and speeds that remain almost constant, even under load
  • Thumbwheel for Speed Preselection and Impact Rate
  • Two-speed gear unit: two drilling speeds for effective drilling in wood and metal
  • Metabo Marathon motor with dust protection for long service life
  • High performance hammer action, precisely mounted in a housing made of aluminum alloy: long-lasting and robust
  • Metabo S-automatic torque limiting clutch: mechanical decoupling of the drive for safe working should the drill stop unexpectedly.
  • Restart protection: prevents unintentional start-up after power supply interruption
  • Lockable switch for trouble-free working in continuous operation
  • Cable-protecting ball joint for the best freedom of motion when working
The machine shown may differ in equiment and technical details depending on the configuration.
Kindly pay attention to delivery scope and product description.
Accessories included only if listed in the delivery scope.
Parameters
Max. single blow energy (EPTA)
3.4 J
Maximum impact rate
4500 BPM
Rated input power
1100 W
Max. capacity in concrete with hammer drills
1 3/32 "
Max. capacity in masonry with core bits
2 11/16 "
Max. capacity in steel
1/2 / 1/4 "
Max. capacity in soft wood
1 3/8 / 1 3/16 "
No-load speed
0 - 900 / 0 - 2100 RPM
Revolutions at rated load
900 / 2100 RPM
Torque
159 / 159 ft. lbs
Bit retainer
SDS-plus
Collar diameter
1 31/32 "
Weight (without power cable)
7.4 lbs
Vibration
Drilling in metal
4.3 m/s²
Uncertainty of measurement K
1.5 m/s²
Hammer drilling concrete
13.5 m/s²
Uncertainty of measurement K
1.5 m/s²
Chiseling
7.2 m/s²
Uncertainty of measurement K
1.5 m/s²
Noise emission
Sound pressure level
90 dB(A)
Sound power level (LwA)
99 dB(A)
Uncertainty of measurement K
3 dB(A)
  • Hammer chuck for tools with SDS-plus shank end
  • Keyless chuck for tools with cylindrical shank end
  • rubber-coated handle
  • Drilling depth guide
  • Plastic carrying case
Metabo uses cookies in order to optimize and continually improve the design of our website. By continuing to use our website, you consent to the use of cookies. More information