KFM 16-15 F (601753620) Bevelling tool

Metal Carry Case

Order no.: 601753620 EAN: 4007430298485
Rated input power:
1550 W
Max. chamfer height at 45°:
5/8 "
  • Metal Bevelling tool for chamfer heights up to 15mm for weld seam preparation
  • One-touch controller: Patented, tool-free setting of the cutting depth in 0.1" steps; stop points for short setting times, and protection against unintentional adjustment of the cutting depth when working
  • Precise setting of chamfer angle directly using the guide plate
  • Universal carbide burr with three carbide inserts for all chamfer angles from 0-90°
  • Metal Bevelling tool for chamfer heights up to 15mm for weld seam preparation
  • One-touch controller: Patented, tool-free setting of the cutting depth in 0.1" steps; stop points for short setting times, and protection against unintentional adjustment of the cutting depth when working
  • Precise setting of chamfer angle directly using the guide plate
  • Universal carbide burr with three carbide inserts for all chamfer angles from 0-90°
  • Controlled work with large-surface guide plates
  • Stop roller to guide along pipes for easy weld seam preparation
  • Bail handle adjusts without tools for secure, even guiding
  • Metabo Long-life motor with patented dust protection for long service life
  • Electronic overload protection, soft start and restart protection
  • Protection for users with metal sheet sides to deflect chips
Parameters
No-load speed
12000 RPM
Amps
14.2 AMPS
Rated input power
1550 W
Output power
900 W
Max. chamfer width at 45°
13/16 "
Max. chamfer height at 45°
5/8 "
Grade cutting depth setting
0.1 "
3 15/16 "
Weight (without power cable)
15.2 lbs
Cable length
157 1/2 ft
Noise emission
Sound pressure level
93 dB(A)
Sound power level (LwA)
104 dB(A)
Uncertainty of measurement K
3 dB(A)
  • Stopper roller
  • Screwdriver Torx 15
  • Screwdriver SW 4 with T-handle
  • Open-Ended Spanner SW 10
  • Metal carrying case
Metabo uses cookies in order to optimize and continually improve the design of our website. By continuing to use our website, you consent to the use of cookies. More information