KFM 18 LTX 3 RF (601754840) Cordless beveling tool

18V Li-ion; MetaLoc

Order no.: 601754840 EAN: 4007430291462
Battery pack voltage:
18 V
Max. chamfer height at 45°:
5/32 "
  • World's first cordless metal bevelling machine for 45° chamfers up to 4 mm and radii of 2 and 3 mm
  • Surfaces free from oxide and burrs as ideal preparation for the application of powder or paint coatings for maximum protection from corrosion
  • One-touch controller: Patented, tool-free setting of the cutting depth in 0.1 steps; stop points for short setting times, and protection against unintentional adjustment of the cutting depth when working
  • Slim cutter head for working on tubes, on drilled holes from Ø 13 mm, and on exterior contours
  • Parallel stop for a uniform finish when processing straight edges
  • World's first cordless metal bevelling machine for 45° chamfers up to 4 mm and radii of 2 and 3 mm
  • Surfaces free from oxide and burrs as ideal preparation for the application of powder or paint coatings for maximum protection from corrosion
  • One-touch controller: Patented, tool-free setting of the cutting depth in 0.1 steps; stop points for short setting times, and protection against unintentional adjustment of the cutting depth when working
  • Slim cutter head for working on tubes, on drilled holes from Ø 13 mm, and on exterior contours
  • Parallel stop for a uniform finish when processing straight edges
  • Battery pack can be swiveled for better working in hard to reach places.
  • Overload protection: protects the motor from overheating
  • Electronic soft start for smooth start-up
  • Restart protection: prevents unintentional start-up after power supply interruption
  • Detachable dust filter protects motor from coarse particles
  • Ultra-M technology for highest performance, gentle efficient charging, optimum energy utilization and long service life.
  • 3-year warranty on battery packs thanks to the combined elements of Ultra-M technology
Parameters
Type of battery pack
Li-ion
Battery pack voltage
18 V
No-load speed
7000 RPM
Max. chamfer width at 45°
1/4 "
Max. chamfer height at 45°
5/32 "
Grade cutting depth setting
0.00394 "
13 mm
Weight (including battery pack)
6.8 lbs
Noise emission
Sound pressure level
84 dB(A)
Sound power level (LwA)
95 dB(A)
Uncertainty of measurement K
3 dB(A)
  • 2 Carbide indexable inserts 45° chamfer
  • 2 Carbide indexable inserts radius R2
  • 2 Carbide indexable inserts radius R3
  • Parallel guide / rip fence
  • Screwdriver Torx 15
  • Side handle Metabo VibraTech (MVT)
  • Dust filter
  • MetaLoc case
  • (without battery pack, without charger)
Metabo uses cookies in order to optimize and continually improve the design of our website. By continuing to use our website, you consent to the use of cookies. More information