Charger

Chargers, charging stations, Non-EU
Order no.
Charger ASC 30-36 V, 14.4-36 V, "AIR COOLED", USA/CND (627046000)
  • Monitored charging with microcontroller
  • Battery monitoring
  • Charge time approximately 30 minutes at 1.5 Ah
  • "AIR COOLED" function
  • For charging all Li-Power Compact, Li-Power Plus, Li-Power Extreme battery packs.
  • Monitored charging with microcontroller: the battery pack is charged with 2.5 ampere with constant monitoring of voltage flow, temperature flow and maximum temperature. The charger ends the charging process immediately after full charging. Thus, there is no overcharging and the life of the battery pack increases.
  • Charger switches to compensation charge: to conserve capacity, the battery pack is charged for 1 second every 45 seconds with 2.5 ampere.
  • "AIR COOLED" function: the patented principle is based on air-cooling the battery pack during the charging process. The battery packs are gently cooled down to the required charging temperature, and then constantly maintained at optimum temperature during the charging process. This principle allows a higher tool life of the battery packs and up to 30% shorter total charging time to be achieved.

Mains voltage: 110 - 120 V
Mains frequency: 50 - 60 Hz
627046000
     
Superfast charger ASC Ultra,14,4-36V USA (627268000)

Mains voltage: 110 - 120 V
Mains frequency: 50 - 60 Hz
627268000
     
Charger AC 30 Plus, 4.8-18 V, "AIR COOLED", AUS (627278000)
  • Monitored charging with microcontroller
  • Battery monitoring
  • Charge time approximately 30 minutes at 1.4 Ah
  • "AIR COOLED" function
  • Monitored charging with microcontroller: the battery pack is charged with 2.5 ampere with constant monitoring of voltage flow, temperature flow and maximum temperature. The charger ends the charging process immediately after full charging. Thus, there is no overcharging and the life of the battery pack increases.
  • Charger switches to compensation charge: to conserve capacity, the battery pack is charged for 1 second every 45 seconds with 2.5 ampere.
  • For charging all old and new Metabo NiCd and NiMH 4.8 V -18 V battery packs, as well as new Li-Ion 12 V-18 V battery packs.
  • "AIR COOLED" function: the patented principle is based on air-cooling the battery pack during the charging process. The battery packs are gently cooled down to the required charging temperature, and then constantly maintained at optimum temperature during the charging process. This principle allows a higher tool life of the battery packs and up to 30% shorter total charging time to be achieved.

Mains voltage: 230 - 240 V
Mains frequency: 50 - 60 Hz
627278000
     
Charger ASS 15 Plus, 24-25.2 V, "AIR COOLED", USA (627285000)
  • For charging Metabo NiCd battery packs of 24-25.2 V, as well as Li-ion battery packs of 24-25.2 V (Cordless combination hammers KHA 24)
  • The battery packs must be suitable for sliding onto the charger.
  • Monitored charging with microcontroller
  • Battery monitoring
  • Charge time approximately 15 minutes at 1.4 Ah
  • "AIR COOLED" function
  • "Refresh" function for maintenance of batteries for NiCd battery packs
  • For connecting to 110/120 V, 50-60 Hz
  • Monitored charging with microcontroller: the battery pack is charged with 5 ampere with constant monitoring of voltage flow, temperature flow and maximum temperature. The charger ends the charging process immediately after full charging. Thus, there is no overcharging and the life of the battery pack increases.
  • Charger switches to compensation charge: to conserve the capacity, the battery packs are subsequently charged with maintenance charging current.
  • "AIR COOLED" function: the patented principle is based on air-cooling the battery pack during the charging process. The battery packs are gently cooled down to the required charging temperature, and then constantly maintained at optimum temperature during the charging process. This principle allows a higher tool life of the battery packs and up to 30% shorter total charging time to be achieved.
  • "Refresh" function: with NiCd battery packs, the natural self-discharge can result in the cells in the battery pack having different charging levels. This means that the full battery pack capacity is no longer available for the application. If you notice such an effect, you can restore the full battery pack capacity in the "Refresh" mode. For charging Metabo NiCd battery packs from 24-25.2 V, as well as Li-Ion battery packs from 24-25.2 V.

Mains voltage: 110 - 120 V
Mains frequency: 50 - 60 Hz
627285000
     
Desktop charger ASC multi 8, 14.4-36 V, "AIR COOLED", US/CND (627301000)
  • Fast, parallel charging of up to eight Li-ion and LiHD slide-on battery packs from 14.4 - 36 volts; no time loss when charging multiple batteries at once
  • Patented "AIR COOLED" charging technology for all individual battery packs for fast, safe charging
  • Robust aluminium housing with hook for space-saving wall mounting. With carry handle for mobile use
  • With a lead (680 watts) for 8 full-power charging stations with process-controlled charging management for each individual battery bay
  • Side on/off switch for the entire desktop charger
  • Charge rate: each 3.0 A Charge time: approx. 30 minutes at 1.5 Ah; approx. 80 minutes at 4.0 Ah
  • Space-saving and tidy solution, ideal for medium-sized and large industrial companies and large trade companies.
  • Easy maintenance, requiring only annual BGVa3 test for lead cable, rather than 8 tests

Mains voltage: 110 - 120 V
Mains frequency: 50 - 60 Hz
627301000
     
Adapter for older Metabo chargers
Order no.
Adapter for battery packs/ chargers (627075000)
  • For inserting older battery packs (starting 1981, models 1 and 2) into the new "AIR COOLED" chargers. Also for inserting "AIR COOLED" batteries into older chargers

627075000
     

Charger

Charger

 
Metabo uses cookies in order to optimize and continually improve the design of our website. By continuing to use our website, you consent to the use of cookies. More information