KFM 18 LTX 3 RF (601754840) Cordless bevelling tool for metal

18V; metaBOX 215

Order no.: 601754840 EAN: 4007430291462
Battery voltage:
18 V
Max. chamfer height at 45°:
4 mm
Possible radii:
R2 / R3
  • The most powerful cordless metal bevelling tool for 45° chamfers up to 4 mm and radii of 2 and 3 mm
  • Surfaces free from oxide and burrs as ideal preparation for the application of powder or paint coatings for maximum protection from corrosion
  • One-touch controller: Patented, tool-free setting of the cutting depth in 0.1 steps; stop points for short setting times, and protection against unintentional adjustment of the cutting depth when working
  • Slim milling head and ball bearing stationary seal ring for working in pipes and on curves
  • Bail handle adjusts without tools for secure, even guiding
  • Battery pack can be swivelled for better access in hard to reach places
  • The most powerful cordless metal bevelling tool for 45° chamfers up to 4 mm and radii of 2 and 3 mm
  • Surfaces free from oxide and burrs as ideal preparation for the application of powder or paint coatings for maximum protection from corrosion
  • One-touch controller: Patented, tool-free setting of the cutting depth in 0.1 steps; stop points for short setting times, and protection against unintentional adjustment of the cutting depth when working
  • Slim milling head and ball bearing stationary seal ring for working in pipes and on curves
  • Guide stop for a uniform finish and high quality of the surface when processing straight sheets
  • Bail handle adjusts without tools for secure, even guiding
  • Battery pack can be swivelled for better access in hard to reach places
  • Overload protection: protects the motor from overheating
  • Electronic soft start for smooth start-up
  • Restart protection: prevents unintentional start-up after battery pack change
  • Detachable dust protection filter protects motor from coarse particles
  • With metaBOX, the intelligent solution for transport and storage
  • Many brands, one battery pack system: This product can be combined with all 18V battery packs and chargers of the CAS brands: www.cordless-alliance-systems.com
The machine shown may differ in equipment and technical details depending on the configuration.
Kindly pay attention to delivery scope and product description.
Accessories included only if listed in the delivery scope.
Characteristics
Type of battery pack
Li-Power
Battery voltage
18 V
No-load speed
7000 rpm
Type of edges
Chamfer and radius
Max. chamfer width 45°
6 mm
Max. chamfer height at 45°
4 mm
Possible radii
R2 / R3
Grading of cutting depth setting
0.1 mm
Curves smallest internal Ø
13 mm
Weight without battery pack
2.4 kg
Weight with battery pack
3.1 kg
Vibration
Vibration
0.94 m/s²
Uncertainty of measurement K
1.5 m/s²
Noise emission
Sound pressure level
84 dB(A)
Sound power level (LwA)
95 dB(A)
Uncertainty of measurement K
3 dB(A)
  • 2 Carbide indexable inserts 45° chamfer
  • 2 Carbide indexable inserts radius R2
  • 2 Carbide indexable inserts radius R3
  • Guide Stop
  • Screwdriver for Torx screws 15
  • Bow-type handle
  • Dust Protection Filter
  • metaBOX 215
  • without battery pack, without charger
Full service - Complete protection for full cost control
Full service price group FS4
One-time cost for 36 months (RRP with VAT) 109.00 £

The full service benefits:

  • All repairs within 3 years are fully covered, even repairs of wear and tear
  • Free theft protection




This Full Service Package provides all-round protection thanks to fairly calculated service flat rates.
When purchasing the machine buy a full service code from your dealer.
Using this code you can register your machine for the full service within 4 weeks from the date of purchase.

Register at www.metabo-service.com
More information at www.metabo.com/services