KFM 18 LTX 3 RF (601754700) Cordless Bevelling Tool

18V 2x5.5Ah LiHD; Charger ASC 30-36 V ( / ); MetaLoc

Order no.: 601754700 EAN: 4007430293442
Battery voltage:
18 V
Max. chamfer height at 45°:
4 mm
Possible radii:
R2 / R3
  • The most powerful cordless metal bevelling tool for 45° chamfers up to 4 mm and radii of 2 and 3 mm
  • Surfaces free from oxide and burrs as ideal preparation for the application of powder or paint coatings for maximum protection from corrosion
  • One-touch controller: Patented, tool-free setting of the cutting depth in 0.1 steps; stop points for short setting times, and protection against unintentional adjustment of the cutting depth when working
  • Slim milling head for working on tubes, on bores from Ø 13 mm, and on exterior contours
  • Parallel guide / rip fence for a uniform finish when processing straight edges
  • LiHD battery pack for ultimate performance, extremely long runtime and service life
  • The most powerful cordless metal bevelling tool for 45° chamfers up to 4 mm and radii of 2 and 3 mm
  • Surfaces free from oxide and burrs as ideal preparation for the application of powder or paint coatings for maximum protection from corrosion
  • One-touch controller: Patented, tool-free setting of the cutting depth in 0.1 steps; stop points for short setting times, and protection against unintentional adjustment of the cutting depth when working
  • Slim milling head for working on tubes, on bores from Ø 13 mm, and on exterior contours
  • Parallel guide / rip fence for a uniform finish when processing straight edges
  • Battery pack can be swivelled for better access in hard to reach places
  • Overload protection: protects the motor from overheating
  • Electronic soft start for smooth start-up
  • Restart protection: prevents unintentional start-up after power supply interruption
  • Detachable dust protection filter protects motor from coarse particles
  • LiHD battery pack for ultimate performance, extremely long runtime and service life
  • Ultra-M technology: highest performance, gentle charging and 3 years of warranty on the battery pack.
The machine shown may differ in equipment and technical details depending on the configuration.
Kindly pay attention to delivery scope and product description.
Accessories included only if listed in the delivery scope.
Characteristics
Type of battery pack
LiHD
Battery pack capacity
2 x 5.5 Ah
Battery voltage
18 V
No-load speed
7000 rpm
Type of edges
Chamfer and radius
Max. chamfer width 45°
6 mm
Max. chamfer height at 45°
4 mm
Possible radii
R2 / R3
Grading of cutting depth setting
0.1 mm
Curves smallest internal Ø
13 mm
Weight (including battery pack)
3.1 kg
Noise emission
Sound pressure level
84 dB(A)
Sound power level (LwA)
95 dB(A)
Uncertainty of measurement K
3 dB(A)
  • 2 Carbide indexable inserts 45° chamfer
  • MetaLoc case
  • 2 Carbide indexable inserts radius R2
  • 2 Carbide indexable inserts radius R3
  • Guide Stop
  • Screwdriver Torx 15
  • Bow-type handle
  • Dust protection filter
  • 2 LiHD battery packs (18 V/5.5 Ah)
  • Charger ASC 30-36 V "AIR COOLED"
In order to design the website in an optimal manner and to continuously improve it, Metabo uses cookies. If you continue using the website, you agree to the use of cookies. More information