Dust extraction

Suction hose and adapter
Order no.
Adapter 35/58 mm, for extraction (630316000)

630316000
     
Extraction units
Order no.
Vacuum cleaner adapter DDE 14 (630829000)
  • Vacuum cleaner adapter for extracting drilling dust at the hole entry point
  • Safe and dust-free drilling in walls and ceilings
  • By virtue of the 2-chamber system and the foam rubber gasket it stays attached to almost all (even uneven) surfaces, such as plaster, natural stone and woodchip wallpaper. Minimal drill dust residue at walls and wallpapers.
  • The adapter is put on the existing suction hose. The negative pressure of the vacuum cleaner keeps the adapter to the respective subsurface.

Drill Ø: 4 - 14 mm
630829000
     
Vacuum cleaner adapter DDE 72 (631343000)
  • Vacuum cleaner adapter for extracting drilling dust at the hole entry point
  • Safe and dust-free drilling in walls and ceilings
  • By virtue of the 2-chamber system and the foam rubber gasket it stays attached to almost all (even uneven) surfaces, such as plaster, natural stone and woodchip wallpaper. Minimal drill dust residue at walls and wallpapers.
  • The adapter is put on the existing suction hose. The negative pressure of the vacuum cleaner keeps the adapter to the respective subsurface.

Drill Ø: 72 mm
631343000
     
Extraction unit 4-20 mm (631590000)
  • -
  • For all machines with collet diameter 43 mm. For work with drill bits of Ø 4-20 mm; with drilling depth guide; to fasten the extraction unit on the collar of the machines, one requires the support handle 6.31594

Diameter of aperture: 43 mm
631590000
     
Absaugeinrichtung ISA
Order no.
ISA 18 LTX 24 (631341840)
  • Extremely light and compact dust extraction for dust-free drilling in concrete, stone and masonry
  • Simple, tool-free installation to the cordless hammer KHA 18 LTX BL 24 Quick
  • Ideal for working overhead or in areas sensible to dust
  • Health-friendly working with HEPA filter for smallest dust particles
  • Precise setting for different drilling depths and drill bit lengths
  • Tool-free replaceable suction head with low-wear brushes
  • 3 seconds delay to extract the remaining dust from the drill hole
  • Transparent collection container can be emptied easily, e.g. for 160 bores Ø 6 / 40 mm
  • 100% Drilling performance with active dust extraction thanks to being driven by own motor

Drill Ø: 5 - 16 mm
Maximum drill length: 160 mm
Rated input power: 65 W
Weight: 1.1 kg
: Replacement extraction head
: Metaloc II
631341840
     
ISA 18 LTX 24 (631341890)
  • Extremely light and compact dust extraction for dust-free drilling in concrete, stone and masonry
  • Simple, tool-free installation to the cordless hammer KHA 18 LTX BL 24 Quick
  • Ideal for working overhead or in areas sensible to dust
  • Health-friendly working with HEPA filter for smallest dust particles
  • Precise setting for different drilling depths and drill bit lengths
  • Tool-free replaceable suction head with low-wear brushes
  • 3 seconds delay to extract the remaining dust from the drill hole
  • Transparent collection container can be emptied easily, e.g. for 160 bores Ø 6 / 40 mm
  • 100% Drilling performance with active dust extraction thanks to being driven by own motor

Drill Ø: 5 - 16 mm
Maximum drill length: 160 mm
Rated input power: 65 W
Weight: 1.1 kg
: Replacement extraction head
631341890
     
In order to design the website in an optimal manner and to continuously improve it, Metabo uses cookies. If you continue using the website, you agree to the use of cookies. More information