• Non-impact-proof chucks

Non-impact-proof chucks

Futuro keyl. ch. 10 mm, 3/8" (636321000)
Futuro R keyless chucks
  • Keyless clamping of insertion tools to hand-held and fixed drilling machines
  • The chuck readjusts its tension to match the increasing cutting pressure on the cutting bit
  • The chuck can be opened easily by hand even after the toughest drilling jobs
  • For maximum load
  • For clockwise rotating drills only
  • Not impact-proof
Clamping width Female thread Outer Ø Length (closed) Weight Order no.
1 - 10 mm 3/8" - 24 UNF 37.5 mm 77 mm 0.35 kg 636321000
1 - 10 mm 1/2" - 20 UNF 37.5 mm 77 mm 0.35 kg 636322000
1 - 13 mm 3/8" - 24 UNF 40.5 mm 89 mm 0.6 kg 636341000
1 - 13 mm 1/2" - 20 UNF 40.5 mm 89 mm 0.6 kg 636342000
1 - 13 mm B16 40.5 mm 103 mm 0.6 kg 636343000
1 - 13 mm 1/2" - 20 UNF 47.5 mm 111 mm 0.8 kg 636351000
1 - 13 mm B16 47.5 mm 111 mm 0.8 kg 636353000
1 - 13 mm J6 47.5 mm 111 mm 0.8 kg 636356000
3 - 16 mm 5/8" - 16 UN 50 mm 113 mm 1 kg 636361000
3 - 16 mm B16 50 mm 113 mm 1 kg 636362000
3 - 16 mm B18 50 mm 113 mm 1 kg 636363000
Futuro Plus keyless chuck H2 10 mm, 3/8" (636518000)
Futuro Plus keyless chucks H2, R + L
  • Specially developed for cordless and lightweight drills
  • Plastic sleeve
  • Double sleeve with supporting ring for firm grip of tools
  • Keyless for quick tool change
  • Not impact-proof
  • Drills through using locking screw for clockwise and anti-clockwise operating machines
  • With spanner flat for assembly and disassembly
Clamping width Female thread Outer Ø Length (closed) Weight Order no.
1 - 10 mm 3/8" - 24 UNF 42.7 mm 61 mm 0.2 kg 636518000
1 - 10 mm 1/2" - 20 UNF 42.7 mm 61 mm 0.2 kg 636519000
1.5 - 13 mm 1/2" - 20 UNF 42.7 mm 72.4 mm 0.2 kg 636520000
Keyless chuck Futuro Plus H1, R+L, 1-10 mm, 1/2" UNF (636219000)
Futuro Plus keyless chucks H1, R + L
  • Special design for drills with spindle stop
  • Plastic sleeve
  • Single sleeve without supporting ring
  • Keyless for quick tool change
  • Not impact-proof
  • Drills through using locking screw for clockwise and anti-clockwise operating machines
  • With spanner flat for assembly and disassembly
Clamping width Female thread Outer Ø Length (closed) Weight Order no.
1 - 10 mm 1/2" - 20 UNF 40 mm 49 mm 0.15 kg 636219000
1 - 10 mm 3/8" - 24 UNF 42.7 mm 61 mm 0.2 kg 636515000
1.5 - 13 mm 1/2" - 20 UNF 42.7 mm 72.4 mm 0.2 kg 636517000