Charger

Chargers, Non-EU
Order no.
Charger ASC 30-36 V, 14.4 - 36 V, "AIR COOLED", GB (627045000)
  • Monitored charging with microcontroller
  • Battery diagnosis
  • Charge time approximately 30 minutes at 1.5 Ah
  • "AIR COOLED" function
  • For charging all Li-Power Compact, Li-Power Plus, Li-Power Extreme battery packs
  • Monitored charging with microcontroller: the battery pack is charged with 2.5 ampere with constant monitoring of voltage flow, temperature flow and maximum temperature. The charger ends the charging process immediately after full charging. Thus, there is no overcharging and the life of the battery pack increases.
  • Charger switches to compensation charge: to conserve the capacity, the battery pack is charged for 1 second every 45 seconds with 2.5 ampere.
  • "AIR COOLED" function: the patented principle is based on air-cooling the battery pack during the charging process. The battery packs are gently cooled down to the required charging temperature, and then during the charging process are constantly maintained at optimum temperature. With this principle, a higher tool life of the battery packs and up to 30% shorter total charging time can be achieved.

Mains voltage: 230 - 240 V
Mains frequency: 50 - 60 Hz
627045000
     
Charger LC 40, 10.8 V, GB (627066000)
  • Charger, GB model.
  • Especially for the PowerMaxx 12

Mains voltage: 230 - 240 V
Mains frequency: 50 - 60 Hz
627066000
     
Charger LC 40, 10.8 V, USA (627069000)
  • Charger USA version
  • Especially for the PowerMaxx 12

Mains voltage: 230 - 240 V
Mains frequency: 50 - 60 Hz
627069000
     
Charger ASS 15 Plus, 24-25.2 V, "AIR COOLED", USA (627285000)
  • For charging Metabo NiCd battery packs of 24-25.2 V, as well as Li-ion battery packs of 24-25.2 V (Cordless combi hammers KHA 24)
  • The battery packs must be suitable for sliding onto the charger.
  • Monitored charging with microcontroller
  • Battery diagnosis
  • Charge time approximately 15 minutes at 1.4 Ah
  • "AIR COOLED" function
  • "Refresh" function for maintenance of batteries for NiCd battery packs
  • For connecting to 110/120 V, 50-60 Hz
  • Monitored charging with microcontroller: the battery pack is charged with 5 ampere with constant monitoring of voltage flow, temperature flow and maximum temperature. The charger ends the charging process immediately after full charging. Thus, there is no overcharging and the life of the battery pack increases.
  • Charger switches to compensation charge: to conserve the capacity, the battery packs are subsequently charged with maintenance charging current.
  • "AIR COOLED" function: the patented principle is based on air-cooling the battery pack during the charging process. The battery packs are gently cooled down to the required charging temperature, and then during the charging process are constantly maintained at optimum temperature. With this principle, a higher tool life of the battery packs and up to 30% shorter total charging time can be achieved.
  • "Refresh" function: with NiCd battery packs, the natural self-discharge can result in the cells in the battery pack having different charging levels. This means that the full battery pack capacity is no longer available for the application. If you notice such an effect, you can restore the full battery back capacity in the "Refresh" mode. For charging Metabo NiCd battery packs from 24-25.2 V, as well as Li-Ion battery packs from 24-25.2 V.

Mains voltage: 110 - 120 V
Mains frequency: 50 - 60 Hz
627285000
     
"AIR COOLED" Charger ASC 15, 14.4-36 V, GB (627293000)
  • For charging all Li-Power Compact, Li-Power Plus, Li-Power Extreme battery packs
  • Monitored charging with microcontroller
  • Battery diagnosis
  • Charge time approximately 25 minutes at 1.3 Ah
  • "AIR COOLED" function
  • For connecting to 230 / 240 V, 50-60 Hz (EU)
  • Monitored charging with microcontroller: the battery pack is charged with 5 ampere with constant monitoring of voltage flow, temperature flow and maximum temperature. The charger ends the charging process immediately after full charging. Thus, there is no overcharging and the life of the battery pack increases. Monitored charging with microcontroller: the battery pack is charged with 5 ampere with constant monitoring of voltage flow, temperature flow and maximum temperature. The charger ends the charging process immediately after full charging. Thus, there is no overcharging and the life of the battery pack increases.
  • Charger switches to compensation charge: to conserve the capacity, the battery packs are subsequently charged with maintenance charging current.
  • "AIR COOLED" function: the patented principle is based on air-cooling the battery pack during the charging process. The battery packs are gently cooled down to the required charging temperature, and then during the charging process are constantly maintained at optimum temperature. With this principle, a higher tool life of the battery packs and up to 30% shorter total charging time can be achieved.

Mains voltage: 230 - 240 V
Mains frequency: 50 - 60 Hz
627293000
     
Adapter for older Metabo chargers
Order no.
Adapter for battery packs/ chargers (627075000)
  • For inserting older battery packs (starting 1981, models 1 and 2) into the new "AIR COOLED" chargers. Also for inserting "AIR COOLED" batteries into older chargers

627075000
     
Chargers
Order no.
Quick charger ASC Ultra, 14.4-36 V, "AIR COOLED", EU (627265000)
  • For charging all Li-Power and LiHD slide-on battery packs (14.4 V - 36 V).
  • Patented “AIR COOLED“ charging technology
  • Charging current 6.5 A
  • Very low stand-by input power
  • Processor-controlled charging management system
  • Charge time approximately 30 minutes at 1.5 Ah; approximately 35 minutes at 4.0 Ah

Mains voltage: 230 - 240 V
Mains frequency: 50 - 60 Hz
627265000
     
Charger AC 30 Plus, 4.8-18 V, "AIR COOLED", EU (627275000)
  • For charging all old (with adapter 627075000) and new Metabo NiCd and NiMH battery packs of 4.8 V -18 V, as well as the new Li-Ion battery packs of 12 V-18 V
  • "AIR COOLED" function
  • Charging current 2.5 A

Mains voltage: 230 - 240 V
Mains frequency: 50 - 60 Hz
627275000
     
Charger LC 60, 7.2 V, EU (627306000)
  • For charging Li-ion battery packs 7.2 V
  • Charging current 2.4 A

Mains voltage: 230 - 240 V
Mains frequency: 50 - 60 Hz
627306000
     
In order to design the website in an optimal manner and to continuously improve it, Metabo uses cookies. If you continue using the website, you agree to the use of cookies. More information