DG 25 Set (604116500) Air die grinder

Plastic Carry Case

Order no.: 604116500 EAN: 4007430228918
Operating pressure:
6.2 bar / 90 psi
Maximum speed:
25000 rpm
  • For sanding/grinding, deburring, moulding/routing and engraving
  • Integrated speed control
  • Ergonomic, partially rubber-coated housing: cold-insulating, non-slip and low vibration for comfortable work
  • Safety lever for protection against accidental start up
  • Rotatable exhaust guide at the side of the housing.
The machine shown may differ in equipment and technical details depending on the configuration.
Kindly pay attention to delivery scope and product description.
Accessories included only if listed in the delivery scope.
Characteristics
Operating pressure
6.2 bar / 90 psi
Air requirement
300 l/min / 11 cfm
Maximum speed
25000 rpm
Collet chuck bore
6 mm / 0.2362 "
Weight
0.43 kg / 0.9 lbs
Vibration
Surface grinding
0.1 m/s²
Uncertainty of measurement K
0.8 m/s²
Noise emission
Sound pressure level
75 dB(A)
Sound power level (LwA)
87 dB(A)
Uncertainty of measurement K
3 dB(A)
  • EURO Plug-in nipple 1/4"
  • 2 collets (3 mm, 6 mm)
  • 5 mounted points each (3 mm, 6 mm)
  • 2 open-jawed spanners (13 mm, 16 mm)
  • Plastic carry case
  • ARO/Orion Plug-in nipple 1/4"
  • ISO Plug-in nipple 1/4"