KFM 9-3 RF (601751750) Bevelling tool for metal

(110-120 V / 50 - 60 Hz); metaBOX 215

Order no.: 601751750 EAN: 4007430293428
Rated input power:
900 W
Max. chamfer height at 45°:
4 mm / 5/32 "
Possible radii:
R2 / R3
  • Compact metal bevelling tool for 45° chamfers and radii of 2 to 3 mm at visible edges
  • Surfaces free from oxide and burrs as ideal preparation for the application of powder or paint coatings for maximum protection from corrosion
  • One-touch controller: Patented, tool-free setting of the cutting depth in 0.1 steps; stop points for short setting times, and protection against unintentional adjustment of the cutting depth when working
  • Slim cutter head with standard carbide indexable inserts and ball-bearing stationary seal ring for working in tubes and in curves
  • Guide stop for a uniform finish and high quality surface finish when processing straight edges
  • Bail handle adjusts without tools for secure, even guiding
  • Electronic overload protection, soft start and restart protection
  • Slim design for ideal handling
  • Compact metal bevelling tool for 45° chamfers and radii of 2 to 3 mm at visible edges
  • Surfaces free from oxide and burrs as ideal preparation for the application of powder or paint coatings for maximum protection from corrosion
  • One-touch controller: Patented, tool-free setting of the cutting depth in 0.1 steps; stop points for short setting times, and protection against unintentional adjustment of the cutting depth when working
  • Slim cutter head with standard carbide indexable inserts and ball-bearing stationary seal ring for working in tubes and in curves
  • Guide stop for a uniform finish and high quality surface finish when processing straight edges
  • Bail handle adjusts without tools for secure, even guiding
  • Metabo Long-life motor with patented dust protection for long service life
  • Thumbwheel controlled Vario-Constamatic (VC)-Full wave electronics ideal for working on materials requiring customised speeds, and at speeds which remain almost constant under load
  • Electronic safety shutdown of the motor for safe working in case the tool stops unexpectedly
  • Electronic overload protection, soft start and restart protection
  • Slim design for ideal handling
  • With metaBOX, the intelligent solution for transport and storage
The machine shown may differ in equipment and technical details depending on the configuration.
Kindly pay attention to delivery scope and product description.
Accessories included only if listed in the delivery scope.
Characteristics
No-load speed
4500 - 11500 rpm
Rated input power
900 W
Output power
470 W
Type of edges
Chamfer and radius
Chamfer angles
45 - 45 °
Max. chamfer width 45°
6 mm / 1/4 "
Max. chamfer height at 45°
4 mm / 5/32 "
Possible radii
R2 / R3
Grading of cutting depth setting
0.1 mm / 0.004 "
Curves smallest internal Ø
13 mm
Weight (without power cable)
2.5 kg / 5.5 lbs
Cable length
4 m / 13 ft
Vibration
Vibration
0.7 m/s²
Uncertainty of measurement K
1.5 m/s²
Noise emission
Sound pressure level
87 dB(A)
Sound power level (LwA)
98 dB(A)
Uncertainty of measurement K
3 dB(A)
  • 2 carbide indexable inserts 45° chamfer (ISO: DCMT 11 T 304)
  • Guide Stop
  • Screwdriver for Torx screws 15
  • Bow-type handle
  • metaBOX 215
  • 2 Carbide indexable inserts radius R2
  • 2 Carbide indexable inserts radius R3