BEV 1300-2 (600574000) Drill

(220-240 V / 50 - 60 Hz); Cardboard box

Order no.: 600574000 EAN: 4007430314352
Rated input power:
1300 W
Drill Ø steel:
16 / 10 mm // 5/8 / 3/8 "
Drill-Ø soft wood:
40 / 25 mm // 1 9/16 / 1 "
No-load speed:
0 - 1100 / 0 - 3100 rpm
Maximum torque:
44 / 16 Nm // 390 / 142 in-lbs
  • Selectable "impuls" mode for removal of stubborn screws and for spot-drilling on smooth surfaces
  • Vario-Tacho-Constamatic (VTC)-Full Wave Electronics for work with materials requiring customised speeds, which remain constant under load
  • Two-speed gearbox
  • Metabo Marathon motor with patented dust protection for long service life
  • Metabo S-automatic safety clutch: mechanical decoupling of the drive for safe working should the drill stop unexpectedly
  • Selectable "impuls" mode for removal of stubborn screws and for spot-drilling on smooth surfaces
  • Robust die cast aluminium gear housing for optimum heat dissipation and durability
  • Rotating carbon brush bridge for maximum performance even in anti-clockwise operation, e.g. for the removal of stubborn screws
  • Vario-Tacho-Constamatic (VTC)-Full Wave Electronics for work with materials requiring customised speeds, which remain constant under load
  • Thumbwheel for speed preselection
  • Two-speed gearbox
  • Metabo Marathon motor with patented dust protection for long service life
  • Metabo S-automatic safety clutch: mechanical decoupling of the drive for safe working should the drill stop unexpectedly
  • Forward and reverse rotation
  • Spindle with hexagonal recess for screwdriver bits for working without chuck
  • Overload protection: protects the motor from overheating
  • Restart protection: prevents unintentional start-up after power supply interruption
  • Handle with non-slip soft-grip surface
  • Cable-protecting ball joint for optimal freedom of motion when working
  • Wear Indication for Carbon Brush
The machine shown may differ in equipment and technical details depending on the configuration.
Kindly pay attention to delivery scope and product description.
Accessories included only if listed in the delivery scope.
Characteristics
Rated input power
1300 W
Output power
730 W
Drill Ø steel
16 / 10 mm // 5/8 / 3/8 "
Drill-Ø soft wood
40 / 25 mm // 1 9/16 / 1 "
No-load speed
0 - 1100 / 0 - 3100 rpm
Speed at rated load
1100 / 3100 rpm
Gears
2
Maximum torque
44 / 16 Nm // 390 / 142 in-lbs
Collar diameter
43 mm / 1 11/16 "
Chuck capacity
1.5 - 13 mm // 0.059 - 0.512 "
Drill spindle with hexagonal recess
6.35 mm / 1/4 "
Drill spindle thread
1/2 " - 20 UNF
Weight (without power cable)
2.7 kg / 6 lbs
Cable length
4 m / 13 ft
Vibration
Drilling in metal
4.2 m/s²
Uncertainty of measurement K
1.5 m/s²
Noise emission
Sound pressure level
84 dB(A)
Sound power level (LwA)
95 dB(A)
Uncertainty of measurement K
3 dB(A)
  • Geared chuck
  • Chuck key
  • Side handle