- Maximum drilling progress and high breaking performance thanks to maintenance-free brushless motor and high-performance hammer action
- Long service life thanks to brushless technology and robust aluminium die-cast housings of gear and motor
- Combination hammer with 2 functions: hammer drilling and chiselling
- Metabo VibraTech (MVT) with double dampening: Decoupled handle and impact-absorbing counter-oscillating weight actively reduce vibrations for healthy working also in continuous use.
- Ergonomically shaped, slim gripping area with large speed control trigger for comfortable working
- Easily accessible locking switch for chiselling in continuous mode
- Vario-Tacho-Constamatic (VTC)-Full Wave Electronics for work with materials requiring customised speeds, which remain constant under load
- Optional reduction of speed and impact energy for starting a drill hole or working in softer materials
- Electronic soft start for precise spot-drilling
- Metabo S-automatic safety clutch: mechanical decoupling of the drive for safe working should the drill stop unexpectedly
- Restart protection: prevents unintentional start-up after power supply interruption
- Overload protection: protects the motor from overheating
- Low-dust chiselling and drilling with external dust extraction ESA max (accessories)
Combination hammer | (220-240 V / 50 - 60 Hz)
KHEV 8-45 BL (600766520) Combination hammer | (220-240 V / 50 - 60 Hz)
Order no.: 600766520
Your Delivery Scope
rubber-coated side handle
Lubricant for tool shank end
Duster
Plastic carry case
- 12.2 JMax. single blow energy (EPTA)
- 2900 bpmMaximum impact rate
- 1500 WRated input power
- 45 mm / 1 3/4 "Drill-Ø concrete with hammer drills
- SDS-maxTool holder
| Max. single blow energy (EPTA) | 12.2 J |
| Maximum impact rate | 2900 bpm |
| Rated input power | 1500 W |
| Drill-Ø concrete with hammer drills | 45 mm / 1 3/4 " |
| Drill-Ø masonry with core bits | 125 mm / 4 15/16 " |
| No-load speed | 210 / 300 rpm |
| Speed at rated load | 210 / 300 rpm |
| Tool holder | SDS-max |
| Collar diameter | 79.4 mm / 3 5/32 " |
| Weight (without power cable) | 10.1 kg / 22.3 lbs |
| Cable length | 6 m / 236 7/32 " m |
| Hammer drilling concrete | 12.2 m/s² |
| Uncertainty of measurement K | 1.5 m/s² |
| Chiseling | 10.4 m/s² |
| Uncertainty of measurement K | 1.5 m/s² |
| Sound pressure level | 94 dB(A) |
| Sound power level (LwA) | 114 dB(A) |
| Uncertainty of measurement K | 3 dB(A) |
| rubber-coated side handle |
| Lubricant for tool shank end |
| Duster |
| Plastic carry case |
Accessory
Categories 1
17 out of 17 possible accessories
3 variants
17 variants
