- rubber-coated side handle
- Drilling depth guide
- Lubricant for tool shank end
- Duster
- Plastic carry case
Combination hammer | (220-240 V / 50 - 60 Hz)
KHEV 5-40 BL (600765500) Combination hammer | (220-240 V / 50 - 60 Hz)
Order no.: 600765500
Your Delivery Scope
- rubber-coated side handle
- Drilling depth guide
- Lubricant for tool shank end
- 8.7 JMax. single blow energy (EPTA)
- 2900 bpmMaximum impact rate
- 1150 WRated input power
- 40 mm / 1 9/16 "Drill-Ø concrete with hammer drills
- SDS-maxTool holder
- Maximum drilling progress and high breaking performance thanks to maintenance-free brushless motor and high-performance hammer action
- Long service life thanks to brushless technology and robust aluminium die-cast housings of gear and motor
- Combination hammer with 2 functions: hammer drilling and chiselling
- Metabo VibraTech (MVT) with double dampening: Decoupled handle and impact-absorbing counter-oscillating weight actively reduce vibrations for healthy working also in continuous use.
- Ergonomically shaped, slim gripping area with large speed control trigger for comfortable working
- Easily accessible locking switch for chiselling in continuous mode
- Vario-Tacho-Constamatic (VTC)-Full Wave Electronics for work with materials requiring customised speeds, which remain constant under load
- Optional reduction of speed and impact energy for starting a drill hole or working in softer materials
- Electronic soft start for precise spot-drilling
- Metabo S-automatic safety clutch: mechanical decoupling of the drive for safe working should the drill stop unexpectedly
- Restart protection: prevents unintentional start-up after power supply interruption
- Overload protection: protects the motor from overheating
- Low-dust chiselling and drilling with external dust extraction ESA max (accessories)
| Max. single blow energy (EPTA) | 8.7 J |
| Maximum impact rate | 2900 bpm |
| Rated input power | 1150 W |
| Drill-Ø concrete with hammer drills | 40 mm / 1 9/16 " |
| Drill-Ø masonry with core bits | 105 mm / 4 1/8 " |
| No-load speed | 350 / 500 rpm |
| Speed at rated load | 350 / 500 rpm |
| Tool holder | SDS-max |
| Collar diameter | 64.6 mm / 2 9/16 " |
| Weight (without power cable) | 8.3 kg / 18.3 lbs |
| Cable length | 6 m / 236 7/32 " m |
| Hammer drilling concrete | 10.8 m/s² |
| Uncertainty of measurement K | 1.5 m/s² |
| Chiseling | 9.6 m/s² |
| Uncertainty of measurement K | 1.5 m/s² |
| Sound pressure level | 96 dB(A) |
| Sound power level (LwA) | 110 dB(A) |
| Uncertainty of measurement K | 3 dB(A) |
- rubber-coated side handle
- Drilling depth guide
- Lubricant for tool shank end
- Duster
- Plastic carry case
Accessory
Categories
17 out of 17 possible accessories
3 variants
16 variants












