KHE 76 (600341000) Combination Hammer

(220-240 V / 50 - 60 Hz); Plastic Carry Case

Order no.: 600341000 EAN: 4007430179777
Max. single blow energy (EPTA):
11.9 J
Maximum impact rate:
2735 /min
Rated input power:
1500 W
Drill-Ø concrete with hammer drills:
50 mm / 2 "
Bit retainer:
SDS-max
  • Combination hammer chuck for hammer drilling and chiselling
  • Metabo VibraTech (MVT) vibration absorber: the spring-mounted anti-vibration mass reduces vibrations by more than 30%
  • Vario-Tacho-Constamatic (VTC)-Full Wave Electronics for work with materials requiring customised speeds, which remain constant under load
  • Optional 30% impact reduction setting for working with more pliant materials
  • Electronic soft start for precise spot-drilling
  • Combination hammer chuck for hammer drilling and chiselling
  • Metabo VibraTech (MVT) vibration absorber: the spring-mounted anti-vibration mass reduces vibrations by more than 30%
  • Vario-Tacho-Constamatic (VTC)-Full Wave Electronics for work with materials requiring customised speeds, which remain constant under load
  • Optional 30% impact reduction setting for working with more pliant materials
  • Electronic soft start for precise spot-drilling
  • Optimum heat dissipation and low weight thanks to die cast magnesium gear housing
  • Metabo S-automatic safety clutch: mechanical decoupling of the drive for safe working should the drill stop unexpectedly
  • Service display, e.g. to indicate when the carbon brush needs to be replaced, and an LED indicating mains voltage
  • Lockable switch for comfortable working in continuous operation
  • Metabo VibraTech (MVT) side handle for vibration damping to protect the user's health
Characteristics
Max. single blow energy (EPTA)
11.9 J
Maximum impact rate
2735 /min
Rated input power
1500 W
Drill-Ø concrete with hammer drills
50 mm / 2 "
No-load speed
0 - 300 /min
Torque
100 Nm / 885 in-lbs
Bit retainer
SDS-max
Collar diameter
66 mm / 2 19/32 "
Weight (without power cable)
8.4 kg / 18.5 lbs
Cable length
6 m / 20 ft m
Vibration
Hammer drilling concrete
9.7 m/s²
Uncertainty of measurement K
1.5 m/s²
Chiseling
9.7 m/s²
Uncertainty of measurement K
1.5 m/s²
Noise emission
Sound pressure level
96 dB(A)
Sound power level (LwA)
107 dB(A)
Uncertainty of measurement K
3 dB(A)
  • Metabo VibraTech (MVT) side handle
  • Drilling depth guide
  • Lubricant for tool shank end
  • Duster
  • Plastic carry case
In order to design the website in an optimal manner and to continuously improve it, Metabo uses cookies. If you continue using the website, you agree to the use of cookies. More information