- Side handle
- Drilling depth guide
- Lubricant for tool shank end
- Duster
- Plastic carry case
Combination hammer | (220-240 V / 50 - 60 Hz)
KHE 5-40 (600391500) Combination hammer | (220-240 V / 50 - 60 Hz)
Order no.: 600391500
Your Delivery Scope
- Side handle
- Drilling depth guide
- Lubricant for tool shank end
- 8.5 JMax. single blow energy (EPTA)
- 3000 bpmMaximum impact rate
- 1100 WRated input power
- 40 mm / 1 9/16 "Drill-Ø concrete with hammer drills
- SDS-maxTool holder
- Combination hammer with 2 functions: hammer drilling and chiselling
- Metabo VibraTech (MVT): integrated damping system to reduce vibrations in order to protect the user's health
- Easily accessible locking switch for chiselling in continuous mode
- Vario-Constamatic (VC)-Full wave electronics for working at customised speeds to suit the application materials, and speeds that remain almost constant even under load
- Thumbwheel for preselection of the speed and impact rate
- Electronic soft start for precise spot-drilling
- Optimum heat dissipation and low weight thanks to die cast magnesium gear housing
- Metabo S-automatic safety clutch: mechanical decoupling of the drive for safe working should the drill stop unexpectedly
- Restart protection: prevents unintentional start-up after power supply interruption
- Low-dust chiselling and drilling with external dust extraction ESA max (accessories)
- Wear Indication for Carbon Brush
- Service display, e.g. to indicate when the carbon brush needs to be replaced, and an LED indicating mains voltage
- Early warning system thanks to service LED for targeted planning of the carbon brush replacement 8 working hours before switching off
| Max. single blow energy (EPTA) | 8.5 J |
| Maximum impact rate | 3000 bpm |
| Rated input power | 1100 W |
| Drill-Ø concrete with hammer drills | 40 mm / 1 9/16 " |
| No-load speed | 350 - 540 rpm |
| Speed at rated load | 540 rpm |
| Tool holder | SDS-max |
| Collar diameter | 61 mm / 2.4 " |
| Weight (without power cable) | 7.1 |
| Cable length | 6 m / 19.7 ft m |
| Hammer drilling concrete | 14.6 m/s² |
| Uncertainty of measurement K | 1.5 m/s² |
| Chiseling | 9.7 m/s² |
| Uncertainty of measurement K | 1.5 m/s² |
| Sound pressure level | 98 dB(A) |
| Sound power level (LwA) | 106 dB(A) |
| Uncertainty of measurement K | 3 dB(A) |
- Side handle
- Drilling depth guide
- Lubricant for tool shank end
- Duster
- Plastic carry case
Accessory
Categories
22 out of 22 possible accessories
3 variants
16 variants








