KHE 5-40 (600687000) Combination Hammer

(220-240 V / 50 - 60 Hz); Plastic Carry Case

Order no.: 600687000 EAN: 4007430259158
Max. single blow energy (EPTA):
7.5 J
Maximum impact rate:
3200 bpm
Rated input power:
1010 W
Drill-Ø concrete with hammer drills:
40 mm / 1 9/16 "
Bit retainer:
SDS-max
  • Combination hammer with 2 functions: hammer drilling and chiselling
  • Metabo VibraTech (MVT): integrated damping system and side handle to reduce vibrations in order to protect the user's health
  • Vario-Tacho-Constamatic (VTC)-Full Wave Electronics for work with materials requiring customised speeds, which remain constant under load
  • Thumbwheel for preselection of the speed and impact rate
  • Electronic soft start for precise spot-drilling
  • Metabo S-automatic safety clutch: mechanical decoupling of the drive for safe working should the drill stop unexpectedly
  • Wear Indication for Carbon Brush
  • Combination hammer with 2 functions: hammer drilling and chiselling
  • Metabo VibraTech (MVT): integrated damping system and side handle to reduce vibrations in order to protect the user's health
  • Vario-Tacho-Constamatic (VTC)-Full Wave Electronics for work with materials requiring customised speeds, which remain constant under load
  • Thumbwheel for preselection of the speed and impact rate
  • Electronic soft start for precise spot-drilling
  • Optimum heat dissipation and low weight thanks to die cast magnesium gear housing
  • Metabo S-automatic safety clutch: mechanical decoupling of the drive for safe working should the drill stop unexpectedly
  • Wear Indication for Carbon Brush
The machine shown may differ in equiment and technical details depending on the configuration.
Kindly pay attention to delivery scope and product description.
Accessories included only if listed in the delivery scope.
Characteristics
Max. single blow energy (EPTA)
7.5 J
Maximum impact rate
3200 bpm
Rated input power
1010 W
Drill-Ø concrete with hammer drills
40 mm / 1 9/16 "
Drill-Ø masonry with core bits
90 mm / 3 9/16 "
No-load speed
200 - 350 rpm
Bit retainer
SDS-max
Collar diameter
60 mm / 2 3/8 "
Weight (without power cable)
6.2 kg / 13.7 lbs
Cable length
4 m / 13 ft m
Vibration
Hammer drilling concrete
13.5 m/s²
Uncertainty of measurement K
1.5 m/s²
Chiseling
11.5 m/s²
Uncertainty of measurement K
1.5 m/s²
Noise emission
Sound pressure level
95 dB(A)
Sound power level (LwA)
106 dB(A)
Uncertainty of measurement K
3 dB(A)
  • Metabo VibraTech (MVT) side handle
  • Duster
  • Plastic carry case
  • Drilling depth guide
  • Lubricant for tool shank end
In order to design the website in an optimal manner and to continuously improve it, Metabo uses cookies. If you continue using the website, you agree to the use of cookies. More information