UHEV 2860-2 Quick (600713610) Multi Hammer

Plastic Carry Case

Order no.: 600713610 EAN: 4007430307743
Max. single blow energy (EPTA):
3.4 J
Maximum impact rate:
4500 /min
Rated input power:
1100 W
Drill-Ø concrete with hammer drills:
28 mm / 1 3/32 "
Bit retainer:
SDS-plus
  • Multi-hammer for hammer drilling, drilling without impact in two speeds and chiselling
  • Metabo Quick: quick change between SDS Plus hammer chuck and keyless chuck for drilling in wood and metal
  • Vario-Tacho-Constamatic (VTC)-Full Wave Electronics for work with materials requiring customised speeds, which remain constant under load
  • Two-speed gear unit: two drilling speeds for effective drilling in wood and metal
  • Metabo S-automatic safety clutch: mechanical decoupling of the drive for safe working should the drill stop unexpectedly
  • Restart protection: prevents unintentional start-up after power supply interruption
  • Multi-hammer for hammer drilling, drilling without impact in two speeds and chiselling
  • Metabo Quick: quick change between SDS Plus hammer chuck and keyless chuck for drilling in wood and metal
  • Vario-Tacho-Constamatic (VTC)-Full Wave Electronics for work with materials requiring customised speeds, which remain constant under load
  • Thumbwheel for preselection of the speed and impact rate
  • Two-speed gear unit: two drilling speeds for effective drilling in wood and metal
  • Metabo Marathon motor with dust protection for long service life
  • High performance hammer action, precisely mounted in a housing made of aluminium alloy: long-lasting and robust
  • Perfect ergonomics thanks to the centre of gravity being near the hand and optimised handle contour
  • Bottom switch protected against damage and dust
  • Metabo S-automatic safety clutch: mechanical decoupling of the drive for safe working should the drill stop unexpectedly
  • Restart protection: prevents unintentional start-up after power supply interruption
  • Lockable switch for comfortable working in continuous operation
  • Cable-protecting ball joint for optimal freedom of motion when working
Characteristics
Max. single blow energy (EPTA)
3.4 J
Maximum impact rate
4500 /min
Rated input power
1100 W
Drill-Ø concrete with hammer drills
28 mm / 1 3/32 "
Drill-Ø masonry with core bits
68 mm / 2 11/16 "
Drill Ø steel
13 / 6 mm // 1/2 / 1/4 "
Drill-Ø soft wood
35 / 30 mm // 1 3/8 / 1 3/16 "
No-load speed
0 - 900 / 0 - 2100 /min
Revolutions at rated load
900 / 2100 /min
Torque
18 / 18 Nm // 159 / 159 ft. lbs
Bit retainer
SDS-plus
Collar diameter
50 mm / 1 31/32 "
Weight (without power cable)
3.3 kg / 7.4 lbs
Vibration
Drilling in metal
4.3 m/s²
Uncertainty of measurement K
1.5 m/s²
Hammer drilling concrete
13.5 m/s²
Uncertainty of measurement K
1.5 m/s²
Chiseling
7.2 m/s²
Uncertainty of measurement K
1.5 m/s²
Noise emission
Sound pressure level
90 dB(A)
Sound power level (LwA)
99 dB(A)
Uncertainty of measurement K
3 dB(A)
  • Hammer chuck for tools with SDS-plus shank end
  • Keyless chuck for tools with cylindrical shank
  • rubber-coated side handle
  • Drilling depth guide
  • Plastic carry case
In order to design the website in an optimal manner and to continuously improve it, Metabo uses cookies. If you continue using the website, you agree to the use of cookies. More information