Ejector pin 75 mm
Safety strap
Hexagon socket wrench SW 4
Swarf protection guard
Transport case
Magnetic core drill
MAG 32 (600635500) Magnetic core drill
Order no.: 600635500
Your Delivery Scope
Ejector pin 75 mm
Safety strap
Hexagon socket wrench SW 4
- 1000 WRated input power
- 32 mm / 1 1/4 "Max. drill-Ø with core drill
- 13 mm / 1/2 "Max. drill-Ø with spiral drill
- 50 mm / 2 "Maximum drilling depth
- 700 rpmNo-load speeds
- Weldon shaft 19 mm (3/4")Tool holder
- 12250 NMax. magnetic holding force
- Magnetic core drill with large depth of feed, therefore suitable for use of core drills, spiral drills and countersinks
- Magnetic base with high holding power permits working on vertical surfaces and overhead
- Robust Metabo marathon motor with internal wiring for long service life
- Integrated coolant container for easy to dose internal cooling of the core drill
- Bright LED light for easy alignment in poor light conditions
- Swarf protection can be fixed without tools and protects the user from metal shavings and tool contact
- Protective circuit starts motor only if the magnet is activated
- Restart protection: prevents unintentional start-up after power supply interruption
- Lockable slide for comfortable tool change
- Handle for easy carrying and lifting
- Resistant mains cable (5 m) with rubber shroud
| Rated input power | 1000 W |
| Output power | 520 W |
| Max. drill-Ø with core drill | 32 mm / 1 1/4 " |
| Max. drill-Ø with spiral drill | 13 mm / 1/2 " |
| Maximum drilling depth | 50 mm / 2 " |
| No-load speeds | 700 rpm |
| Speeds at rated load | 450 rpm |
| Tool holder | Weldon shaft 19 mm (3/4") |
| Weight | 11.9 kg / 26.2 lbs |
| Cable length | 5 m / 16 ft |
| Torque | 50 Nm // 443 in-lbs |
| Max. depth of feed | 160 mm / 6 5/16 " |
| Max. magnetic holding force | 12250 N |
| Dimensions of the magnet base | 90 x 189 mm // 3 9/16 x 7 1/2 " |
| Height carriage lowest position | 343 mm / 13 1/2 " |
| Height carriage topmost position | 490 mm / 19 9/32 " |
| Drilling in metal | 2.5 m/s² |
| Uncertainty of measurement K | 1.5 m/s² |
| Sound pressure level | 85 dB(A) |
| Sound power level (LwA) | 98 dB(A) |
| Uncertainty of measurement K | 3 dB(A) |
| Ejector pin 75 mm |
| Safety strap |
| Hexagon socket wrench SW 4 |
| Swarf protection guard |
| Transport case |
Accessory
Categories 1
17 out of 17 possible accessories
19 variants
21 variants
21 variants
