- Extremely powerful two-speed impact drill for fast, versatile drilling with constant speed under load
- Vario-Tacho-Constamatic (VTC)-Full Wave Electronics for work with materials requiring customised speeds, which remain constant under load
- Thumbwheel for Speed Preselection
- Selectable "impuls" mode for removal of stubborn screws and for spot-drilling on smooth surfaces
- Robust die cast aluminium gear housing for optimum heat dissipation and long service life
- Rotating carbon brush bridge for maximum performance even in anti-clockwise operation, e.g. for the removal of stubborn screws
- Metabo Marathon-motor with dust protection for long service life
- Metabo S-automatic safety clutch: mechanical decoupling of the drive for safe working should the tool stop unexpectedly
- Forward and reverse rotation
- Spindle with hexagonal recess for screwdriver bits for working without chuck
- Overload protection: protects the motor from overheating
- Restart protection: prevents unintentional start-up after power supply interruption
- Cable-protecting ball joint for optimal freedom of motion when working
- Wear Indication for Carbon Brush
Impact drill | (220-240 V / 50 - 60 Hz)
SBEV 1300-2 (600785000) Impact drill | (220-240 V / 50 - 60 Hz)
Order no.: 600785000
Your Delivery Scope
Geared Chucks
Chuck Keys
rubber-coated side handle
Drilling depth guide
- 1300 WRated input power
- 44 / 16 Nm // 390 / 142 in-lbsMaximum torque
- 24 mm / 15/16 "Drill-Ø masonry
- 22 mm / 7/8 "Drill-Ø concrete
- 16 / 10 mm // 5/8 / 3/8 "Drill Ø steel
- 40 / 25 mm // 1 9/16 / 1 "Drill-Ø soft wood
- 0 - 1100 / 0 - 3100 rpmNo-load speed
| Rated input power | 1300 W |
| Output power | 730 W |
| Maximum torque | 44 / 16 Nm // 390 / 142 in-lbs |
| Drill-Ø masonry | 24 mm / 15/16 " |
| Drill-Ø concrete | 22 mm / 7/8 " |
| Drill Ø steel | 16 / 10 mm // 5/8 / 3/8 " |
| Drill-Ø soft wood | 40 / 25 mm // 1 9/16 / 1 " |
| No-load speed | 0 - 1100 / 0 - 3100 rpm |
| Speed at rated load | 1100 / 3100 rpm |
| Maximum impact rate | 58900 bpm |
| Gears | 2 |
| Chuck capacity | 1.5 - 13 mm // 1/16 - 1/2 " |
| Collar diameter | 43 mm / 1 11/16 " |
| Drill spindle with hexagonal recess | 6.35 mm / 1/4 " |
| Drill spindle thread | 1/2 " - 20 UNF |
| Chuck clamping type | Geared Chucks |
| Weight (without power cable) | 2.8 kg / 6.2 lbs kg |
| Cable length | 4 m / 13 ft m |
| Drilling in metal | 4.2 m/s² |
| Uncertainty of measurement K | 1.5 m/s² |
| Impact drilling concrete | 17 m/s² |
| Uncertainty of measurement K | 1.5 m/s² |
| Sound pressure level | 106 dB(A) |
| Sound power level (LwA) | 114 dB(A) |
| Uncertainty of measurement K | 3 dB(A) |
| Geared Chucks |
| Chuck Keys |
| rubber-coated side handle |
| Drilling depth guide |
Accessory
Categories 1
120 out of 120 possible accessories
33 variants
13 variants