- Dial gauge for fine tuning the moulding/routing depth with 0.1. mm precision
- Three-level stop to preselect up to 3 different moulding/routing depths
- Robust and torsion-resistant 2-column guide for highest precision
- Hardened and ground interchangeable collet chuck for precise concentricity of tools
- Spindle lock for easy router bit change
- Vario-Tacho-Constamatic (VTC)-Full Wave Electronics for work with materials requiring customised speeds, which remain constant under load
- Thumbwheel for Speed Preselection
- Overload protection: protects the motor from overheating
- Aluminium die cast base plate with coating for easy sliding
- Auto-stop carbon brushes to protect the motor
- Precise parallel guide guided in prisms with fine adjustment for precise milling
- Can also be used on the guide track using an intermediate plate (accessory)
- Extraction possibility by means of connecting an all-purpose vacuum cleaner
Router
Of E 1229 Signal (601229000) Router
Order no.: 601229000
Your Delivery Scope
Fine adjustment parallel guide
Dial gauge for fine adjustment
Extraction connector
Open-jawed spanner
- 5000 - 25500 rpmNo-load speed
- 1200 WRated input power
- 8 mm / 0.315 "Collet chuck bore
| Maximum stroke height | 50 mm / 2 " |
| No-load speed | 5000 - 25500 rpm |
| Rated input power | 1200 W |
| Output power | 780 W |
| Speed at rated load | 25500 rpm |
| Collet chuck bore | 8 mm / 0.315 " |
| Weight (without power cable) | 3.5 kg / 7.7 lbs |
| Cable length | 4 m / 13 ft |
| Routing MDF | 3 m/s² |
| Uncertainty of measurement K | 1.5 m/s² |
| Sound pressure level | 88 dB(A) |
| Sound power level (LwA) | 99 dB(A) |
| Uncertainty of measurement K | 3 dB(A) |
| Fine adjustment parallel guide |
| Dial gauge for fine adjustment |
| Extraction connector |
| Open-jawed spanner |
Accessory
Categories 1
18 out of 18 possible accessories
6 variants
