SXE 150-2.5 BL Set (691036000) Random Orbital Sander

(220-240 V / 50 - 60 Hz); MetaLoc; with Metaloc multi-hole sanding media set, 150 mm, for paint and lacquers

SXE 150-2.5 BL Set (691036000) Random Orbital Sander
Order no.: 691036000 EAN: 4007430325457
Diameter of backing pad:
150 mm / 5.91 "
No-load speed:
4000 - 10000 rpm
Rated input power:
350 W
Orbit diameter:
2.5 mm / 0.1 "
  • Extremely light and flat random orbital sander with symmetrical design for easy change of hands or operation with two hands
  • Orbit diameter 2.5 mm for highest surface quality with good material removal
  • Low vibrations for convenient continuous mode
  • Motor and plate brake permits quick placing down of the machine after use
  • Multi-hole sanding pad for effective extraction and a longer service life of the sanding medium
more product information
Manual Spare-parts list
  • Extremely light and flat random orbital sander with symmetrical design for easy change of hands or operation with two hands
  • Orbit diameter 2.5 mm for highest surface quality with good material removal
  • Non-slip paddle switch with dead man function for safe starting and optionally also control of the speed
  • Vario Tacho Constamatic (VTC) Full-wave Electronics for grinding with materials requiring customised speeds, which remain constant under load
  • Electronic presetting of the desired speed range
  • Soft start minimises surface damage when placing the machine on the work surface
  • Unique Metabo brushless motor highest efficiency when grinding, also in continuous mode
  • Low vibrations for convenient continuous mode
  • Overload protection: protects the motor from overheating
  • Separate main switch protects from unintentional start
  • Motor and plate brake permits quick placing down of the machine after use
  • Extraction possibility by means of connecting an all-purpose vacuum cleaner
  • Multi-hole sanding pad for effective extraction and a longer service life of the sanding medium
  • When working with 125 mm sanding sheets, the sanding pad "multi-hole" Ø 125 mm can be used (accessory 630264000)
  • Service-friendly with exchangeable cable
The machine shown may differ in equipment and technical details depending on the configuration.
Kindly pay attention to delivery scope and product description.
Accessories included only if listed in the delivery scope.
Characteristics
Diameter of backing pad
150 mm / 5.91 "
No-load speed
4000 - 10000 rpm
Rated input power
350 W
Revolutions at rated load
10000 rpm
Orbit diameter
2.5 mm / 0.1 "
Weight (without power cable)
1 kg / 2.2 lbs
Cable length
4.3 m / 14 ft
Vibration
Surface grinding
2.4 m/s²
Noise emission
Sound pressure level
71 dB(A)
Sound power level (LwA)
82 dB(A)
Uncertainty of measurement K
2 dB(A)
  • Sanding pad "multi-hole" with hook and loop
  • Metaloc multi-hole sanding media set, for paint, lacquers (Ø 150 mm)
  • Open-jawed spanner
  • MetaLoc case