KFMPB 15-10 F (601755500) Bevelling Tool

(220-240 V / 50 - 60 Hz); Metal Carry Case

Order no.: 601755500 EAN: 4007430298416
Rated input power:
1550 W
Max. chamfer height at 45°:
10 mm / 3/8 "
  • Metal bevelling tool for chamfer heights up to 10 mm for weld seam preparation with maximum user protection by virtue of a dead-man switch and brake system
  • One-touch controller: Patented, tool-free setting of the cutting depth in 0.1 steps; stop points for short setting times, and protection against unintentional adjustment of the cutting depth when working
  • Precise setting of the chamfer angle directly via the guide plates
  • Universal cutter head with three carbide indexable inserts for all chamfer angles from 0-90°
  • Metal bevelling tool for chamfer heights up to 10 mm for weld seam preparation with maximum user protection by virtue of a dead-man switch and brake system
  • One-touch controller: Patented, tool-free setting of the cutting depth in 0.1 steps; stop points for short setting times, and protection against unintentional adjustment of the cutting depth when working
  • Precise setting of the chamfer angle directly via the guide plates
  • Universal cutter head with three carbide indexable inserts for all chamfer angles from 0-90°
  • Controlled working by virtue of large-scale guide plates
  • Stop roller to guide along pipes for easy preparation of weld seams
  • Front handle for safe and uniform guidance, adjustable without the need for tools
  • Metabo Marathon motor with patented dust protection for long service life
  • Tacho-Constamatic (TC)-Full Wave Electronics: fast work progress by means of constant speed under load
  • Patented, mechanical brake system stops the router bit within 2 seconds after switching off
  • Electronic overload protection, soft start and restart protection
  • Protection of the user by virtue of lateral plates for conveying the chips
Characteristics
No-load speed
12500 /min
Rated input power
1550 W
Output power
840 W
Type of edges
Chamfer
Max. chamfer width 45°
14 mm / 9/16 "
Max. chamfer height at 45°
10 mm / 3/8 "
Grading of cutting depth setting
0.1 mm
Curves smallet outer Ø
75 mm / 2 15/16 "
Weight (without power cable)
5.1 kg / 11.2 lbs
Cable length
4 m / 157 1/2 "
Noise emission
Sound pressure level
91 dB(A)
Sound power level (LwA)
102 dB(A)
Uncertainty of measurement K
3 dB(A)
  • Stop roller
  • Metal carry case
  • Screwdriver Torx 15
  • Screwdriver SW 4 with T-handle
  • Open-jawed spanner SW 10
  • Side handle
In order to design the website in an optimal manner and to continuously improve it, Metabo uses cookies. If you continue using the website, you agree to the use of cookies. More information