KFM 9-3 RF (601751790) Bevelling Tool

(220-240 V / 50 - 60 Hz); MetaLoc

Order no.: 601751790 EAN: 4007430293435
Rated input power:
900 W
Max. chamfer height at 45°:
4 mm / 5/32 "
Possible radii:
R2 / R3
  • Compact metal bevelling tool for 45° chamfers and radii of 2 to 3 mm at visible edges
  • Surfaces free from oxide and burrs as ideal preparation for the application of powder or paint coatings for maximum protection from corrosion
  • One-touch controller: Patented, tool-free setting of the cutting depth in 0.1 steps; stop points for short setting times, and protection against unintentional adjustment of the cutting depth when working
  • Slim cutter head with standard carbide indexable inserts and ball-bearing stationary seal ring for working in tubes and in curves
  • Guide stop for a uniform finish and high quality of the surface when processing straight sheets
  • Compact metal bevelling tool for 45° chamfers and radii of 2 to 3 mm at visible edges
  • Surfaces free from oxide and burrs as ideal preparation for the application of powder or paint coatings for maximum protection from corrosion
  • One-touch controller: Patented, tool-free setting of the cutting depth in 0.1 steps; stop points for short setting times, and protection against unintentional adjustment of the cutting depth when working
  • Slim cutter head with standard carbide indexable inserts and ball-bearing stationary seal ring for working in tubes and in curves
  • Guide stop for a uniform finish and high quality of the surface when processing straight sheets
  • Metabo Marathon motor with patented dust protection for long service life
  • Constamatic (C)-Full wave electronics: fast work progress by means of almost constant speed under load
  • Electronic safety shutdown of the motor for safe working in case the tool stops unexpectedly
  • Electronic overload protection, soft start and restart protection
  • Slim design for ideal handling
Characteristics
No-load speed
11500 /min
Rated input power
900 W
Output power
470 W
Type of edges
Chamfer and radius
Max. chamfer width 45°
6 mm / 1/4 "
Max. chamfer height at 45°
4 mm / 5/32 "
Possible radii
R2 / R3
Grading of cutting depth setting
0.1 mm / 0.00394 " mm
Curves smallest inner Ø
13 mm
Weight (without power cable)
2.5 kg / 5.5 lbs
Cable length
4 m / 5/32 "
Noise emission
Sound pressure level
87 dB(A)
Sound power level (LwA)
98 dB(A)
Uncertainty of measurement K
3 dB(A)
  • 2 Carbide indexable inserts 45° chamfer (ISO: DCMT 11 T 304)
  • Metabo VibraTech (MVT) side handle
  • MetaLoc case
  • 2 Carbide indexable inserts radius R2
  • 2 Carbide indexable inserts radius R3
  • Guide stop
  • Screwdriver Torx 15
In order to design the website in an optimal manner and to continuously improve it, Metabo uses cookies. If you continue using the website, you agree to the use of cookies. More information