KFM 18 LTX 3 RF (601754700) Cordless Bevelling Tool

2x18V/5.5Ah LiHD; Charger ASC 30-36 V (220-240 V / ); MetaLoc

Order no.: 601754700 EAN: 4007430293442
Battery pack voltage:
18 V
Max. chamfer height at 45°:
4 mm / 5/32 "
Max. radius:
R3
  • World's first cordless metal bevelling machine for 45° chamfers up to 4 mm and radii of 2 and 3 mm
  • Surfaces free from oxide and burrs as ideal preparation for the application of powder or paint coatings for maximum protection from corrosion
  • One-touch controller: Patented, tool-free setting of the cutting depth in 0.1 steps; stop points for short setting times, and protection against unintentional adjustment of the cutting depth when working
  • Slim cutter head for working on tubes, on drilled holes from Ø 13 mm, and on exterior contours
  • Parallel stop for a uniform finish when processing straight edges
  • LiHD battery pack for ultimate performance and extremely long service life with minimal temperature generation
  • World's first cordless metal bevelling machine for 45° chamfers up to 4 mm and radii of 2 and 3 mm
  • Surfaces free from oxide and burrs as ideal preparation for the application of powder or paint coatings for maximum protection from corrosion
  • One-touch controller: Patented, tool-free setting of the cutting depth in 0.1 steps; stop points for short setting times, and protection against unintentional adjustment of the cutting depth when working
  • Slim cutter head for working on tubes, on drilled holes from Ø 13 mm, and on exterior contours
  • Parallel stop for a uniform finish when processing straight edges
  • Battery pack can be swivelled for better working in hard to reach places
  • Overload protection: protects the motor from overheating
  • Electronic soft start for smooth start-up
  • Restart protection: prevents unintentional start-up after power supply interruption
  • Detachable dust filter protects motor from coarse particles
  • LiHD battery pack for ultimate performance and extremely long service life with minimal temperature generation
  • Ultra-M technology for highest performance, gentle efficient charging, optimum energy utilisation and long service life
  • 3-year warranty on battery packs thanks to Ultra-M technology
Characteristics
Type of battery pack
LiHD
Capacity of battery pack
5.5 Ah
Battery pack voltage
18 V
No-load speed
7000 /min
Type of edges
Chamfer and radius
Max. chamfer width 45°
6 mm / 1/4 "
Max. chamfer height at 45°
4 mm / 5/32 "
Max. radius
R3
Grading of cutting depth setting
0.1 mm / 0.00394 "
Curves smallest inner Ø
13 mm
Weight (including battery pack)
3.1 kg / 6.8 lbs
Noise emission
Sound pressure level
84 dB(A)
Sound power level (LwA)
95 dB(A)
Uncertainty of measurement K
3 dB(A)
  • 2 Carbide indexable inserts 45° chamfer
  • Metabo VibraTech (MVT) side handle
  • Dust filter
  • 2 LiHD battery packs (18 V/5.5 Ah)
  • Charger ASC 30-36 V "AIR COOLED"
  • MetaLoc case
  • 2 Carbide indexable inserts radius R2
  • 2 Carbide indexable inserts radius R3
  • Guide stop
  • Screwdriver Torx 15
In order to design the website in an optimal manner and to continuously improve it, Metabo uses cookies. If you continue using the website, you agree to the use of cookies. More information