KFM 15-10 F (601752500) Bevelling tool for metal

(220-240 V / 50 - 60 Hz); metaBOX 280 L

Order no.: 601752500 EAN: 4007430298379
Rated input power:
1500 W
Max. chamfer height at 45°:
10 mm / 3/8 "
  • Metal bevelling tool for chamfer heights up to 10 mm for weld seam preparation
  • One-touch controller: Patented, tool-free setting of the cutting depth in 0.1 steps; stop points for short setting times, and protection against unintentional adjustment of the cutting depth when working
  • Precise setting of the chamfer angle directly via the guide plates
  • Universal milling head with three carbide indexable inserts for all chamfer angles from 0-90°
  • Thumbwheel controlled Vario-Constamatic (VC)-Full wave electronics ideal for working on materials requiring customised speeds, and at speeds which remain almost constant under load
  • Metal bevelling tool for chamfer heights up to 10 mm for weld seam preparation
  • One-touch controller: Patented, tool-free setting of the cutting depth in 0.1 steps; stop points for short setting times, and protection against unintentional adjustment of the cutting depth when working
  • Precise setting of the chamfer angle directly via the guide plates
  • Universal milling head with three carbide indexable inserts for all chamfer angles from 0-90°
  • Controlled working by virtue of large-scale guide plates
  • Stop roller to guide along pipes for easy preparation of weld seams
  • Bail handle adjusts without tools for secure, even guiding
  • Metabo Marathon-motor with patented dust protection for long service life
  • Thumbwheel controlled Vario-Constamatic (VC)-Full wave electronics ideal for working on materials requiring customised speeds, and at speeds which remain almost constant under load
  • Electronic overload protection, soft start and restart protection
  • Protection of the user by virtue of lateral plates for conveying the chips
  • With metaBOX, the intelligent solution for transport and storage
The machine shown may differ in equipment and technical details depending on the configuration.
Kindly pay attention to delivery scope and product description.
Accessories included only if listed in the delivery scope.
Characteristics
No-load speed
7800 - 12200 rpm
Rated input power
1500 W
Output power
810 W
Type of edges
Chamfer
Chamfer angles
0 - 90 °
Max. chamfer width 45°
14 mm / 9/16 "
Max. chamfer height at 45°
10 mm / 3/8 "
Grading of cutting depth setting
0.1 mm / 0.00394 "
Curves smallest outer Ø
75 mm / 2 15/16 "
Weight (without power cable)
4.9 kg / 10.8 lbs
Cable length
4 m / 13 ft
Vibration
Vibration
2.5 m/s²
Uncertainty of measurement K
1.5 m/s²
Noise emission
Sound pressure level
92 dB(A)
Sound power level (LwA)
103 dB(A)
Uncertainty of measurement K
3 dB(A)
  • 3 Carbide indexable inserts Universal
  • Screwdriver SW 4 with T-handle
  • Open-jawed spanner SW 10
  • Bow-type handle
  • metaBOX 280 L
  • Stop roller
  • Screwdriver for Torx screws 15