- 2 Carbide indexable inserts 45° chamfer
- 2 Carbide indexable inserts radius R2
- 2 Carbide indexable inserts radius R3
- Thrust ring
- Guide Stop
- Screwdriver for Torx screws 15
- Bow-type handle
- Dust Protection Filter
- metaBOX 215
- without battery pack, without charger
Cordless bevelling tool for metal
KFMVB 18 LTX BL 4 RF (601769840) Cordless bevelling tool for metal
Order no.: 601769840
Your Delivery Scope
- 2 Carbide indexable inserts 45° chamfer
- 2 Carbide indexable inserts radius R2
- 2 Carbide indexable inserts radius R3
- 18 VBattery voltage
- 4 mm / 5/32 "Max. chamfer height at 45°
- R2 / R3Possible radii
- High-power cordless beveling tool for metal with brushless motor for easy and quick preparation for subsequent coating
- For creating 45° chamfers up to 4 mm and radii of 2 and 3 mm on interior and exterior edges, as well as for rounding off the edges of drill holes
- With thrust ring for efficient deburring of sheets 0.7 mm and larger
- Small metal chips are generated during trim routing (no metal dust that is a health hazard)
- Surfaces free from oxide and burrs as ideal preparation for the application of powder or paint coatings for maximum protection from corrosion
- One-touch controller: Patented, tool-free setting of the cutting depth in 0.1 steps; stop points for short setting times, and protection against unintentional adjustment of the cutting depth when working
- Slim milling head and ball bearing stationary seal ring for working in pipes and on curves
- Guide stop for a uniform finish and high quality of the surface when processing straight sheets
- Variable speed setting with thumbwheel for working on materials requiring customised speeds, and at speeds which remain constant under load
- fast brake for increased safety with fast stopping of the tool used.
- Battery pack can be rotated in 90°steps for best ergonomics in any working position
- Electronic overload protection, soft start and restart protection
- Many brands, one battery pack system: This product can be combined with all 18V battery packs and chargers of the CAS brands: www.cordless-alliance-systems.com
| Battery voltage | 18 V |
| No-load speed | 4000 - 8600 rpm |
| Type of edges | Chamfer and radius |
| Max. chamfer width 45° | 6 mm / 1/4 " |
| Max. chamfer height at 45° | 4 mm / 5/32 " |
| Possible radii | R2 / R3 |
| Grading of cutting depth setting | 0.1 mm / 0.0039 " |
| Curves smallest internal Ø | 13 mm / 0.51 " |
| Weight without battery pack | 2.3 kg / 5 lbs |
| Weight with battery pack | 2.7 kg / 5.9 lbs |
| Vibration | 8.1 m/s² |
| Uncertainty of measurement K | 2.5 m/s² |
| Sound pressure level | 81 dB(A) |
| Sound power level (LwA) | 89 dB(A) |
| Uncertainty of measurement K | 3 dB(A) |
- 2 Carbide indexable inserts 45° chamfer
- 2 Carbide indexable inserts radius R2
- 2 Carbide indexable inserts radius R3
- Thrust ring
- Guide Stop
- Screwdriver for Torx screws 15
- Bow-type handle
- Dust Protection Filter
- metaBOX 215
- without battery pack, without charger
Accessory
Categories
8 out of 8 possible accessories
3 variants











