Spacer Rings
2 Diamond cutting discs
Flange nut
Face pin wrench
Chase chisel
Plastic carry case
Wall chaser
MFE 40 (604040610) Wall chaser
Order no.: 604040610
Your Delivery Scope
Spacer Rings
2 Diamond cutting discs
Flange nut
- 10 - 40 mm // 3/8 - 1 9/16 "Adjustable cutting depth
- 9 / 15.5 / 22 / 28.5 / 35 mm / 3/8 / 5/8 / 7/8 / 1 1/8 / 1 3/8 "Possible groove widths
- 125 mm / 5 "Cutting disc Ø
- 1700 WRated input power
- 4.6 kg / 10.1 lbsWeight (without power cable)
- Ideal for electric installations to lay cables and pipework under plaster with cutting depths up to 40 mm
- Maximum work progress by means of powerful motor, constant speed and two-speed high-performance gear
- Robust aluminium die-cast hood with rubber rollers and optimal handle position for comfortable guidance of the machine
- Push cut for optimal view of the marking line
- Channel width and cutting depth can be set
- Metabo Marathon motor with patented dust protection for long service life
- Tacho-Constamatic (TC)-Full Wave Electronics: fast work progress by means of constant speed under load
- Electronic soft start and restart protection for safe working
- LED signal informs about overload or active restart protection
- Clean, low-dust working by means of connecting a Metabo all-purpose vacuum cleaner (certified with ASR 35 M ACP)
- Suitable for slitting grooves up to a width of 30 mm without centre in one workstep (with special accessories)
- Also suitable for cutting with only one diamond cutting disc
- Metabo S-automatic safety clutch: mechanical decoupling of the drive for safe working should the disc stop unexpectedly
| Adjustable cutting depth | 10 - 40 mm // 3/8 - 1 9/16 " |
| Possible groove widths | 9 / 15.5 / 22 / 28.5 / 35 mm / 3/8 / 5/8 / 7/8 / 1 1/8 / 1 3/8 " |
| Cutting disc Ø | 125 mm / 5 " |
| Rated input power | 1700 W |
| Output power | 970 W |
| No-load speed | 5000 rpm |
| Speed at rated load | 4000 rpm |
| Torque | 6 Nm / 53 in-lbs |
| Weight (without power cable) | 4.6 kg / 10.1 lbs |
| Cable length | 4 m / 13 ft |
| Vibration | 5.5 m/s² |
| Uncertainty of measurement K | 1.5 m/s² |
| Sound pressure level | 93 dB(A) |
| Sound power level (LwA) | 104 dB(A) |
| Uncertainty of measurement K | 3 dB(A) |
| Spacer Rings |
| 2 Diamond cutting discs |
| Flange nut |
| Face pin wrench |
| Chase chisel |
| Plastic carry case |
Accessory
Categories 1
3 out of 3 possible accessories
