Guard
Inner support flange
Nut with two holes
Side handle
Flat-pin spanner
Angle grinder | (110-120 V / 50 - 60 Hz)
W 2000-180 (606429460) Angle grinder | (110-120 V / 50 - 60 Hz)
Order no.: 606429460
Your Delivery Scope
Guard
Inner support flange
Nut with two holes
- 180 mm // 7 "Disc-Ø
- 8450 rpmNo-load speed
- 10 Nm / 89 in-lbsTorque
- Robust motor
- Side handle can be mounted in three positions
- Metabo safety switch prevents unintentional start
| Disc-Ø | 180 mm // 7 " |
| Output power | 1370 W |
| No-load speed | 8450 rpm |
| Speed at rated load | 5600 rpm |
| Torque | 10 Nm / 89 in-lbs |
| Spindle thread | 5/8" - 11 UNC |
| Handle circumference | 142 mm / 5.591 " |
| Weight (without power cable) | 5 kg / 11 lbs |
| Cable length | 4 m / 13 ft |
| Surface grinding | 6.5 m/s² |
| Uncertainty of measurement K | 1.5 m/s² |
| Grinding with sandpaper | 2.5 m/s² |
| Uncertainty of measurement K | 1.5 m/s² |
| Sound pressure level | 92 dB(A) |
| Sound power level (LwA) | 100 dB(A) |
| Uncertainty of measurement K | 3 dB(A) |
| Guard |
| Inner support flange |
| Nut with two holes |
| Side handle |
| Flat-pin spanner |
Accessory
Categories 1
48 out of 48 possible accessories
