Guard
Inner support flange
Nut with two holes
Side handle
Flat-pin spanners
Angle grinder
WP 1100-125 (603612420) Angle grinder
Order no.: 603612420
Your Delivery Scope
Guard
Inner support flange
Nut with two holes
- 115 / 125 mm // 4 1/2 / 5 "Disc-Ø
- 1100 WRated input power
- 12000 rpmNo-load speed
- 2.6 Nm / 23 in-lbsTorque
- Robust, universal and economical: ergonomic angle grinder for any application
- Powerful motor with good overload capacity
- Tool-free adjustable guard; twist-proof
- Paddle switch with dead man function: safe to operate due to an ergonomically integrated switch
- Suitable for 120 Volt direct current (DC)
| Disc-Ø | 115 / 125 mm // 4 1/2 / 5 " |
| Rated input power | 1100 W |
| Output power | 700 W |
| No-load speed | 12000 rpm |
| Speed at rated load | 7000 rpm |
| Torque | 2.6 Nm / 23 in-lbs |
| Spindle thread | 5/8" - 11 UNC |
| Weight (without power cable) | 2.2 kg / 4.9 lbs |
| Cable length | 2.5 m / 8 ft |
| Surface grinding | 7.5 m/s² |
| Uncertainty of measurement K | 1.5 m/s² |
| Grinding with sandpaper | 2.5 m/s² |
| Uncertainty of measurement K | 1.5 m/s² |
| Sound pressure level | 88 dB(A) |
| Sound power level (LwA) | 99 dB(A) |
| Uncertainty of measurement K | 3 dB(A) |
| Guard |
| Inner support flange |
| Nut with two holes |
| Side handle |
| Flat-pin spanners |
Accessory
Categories 1
80 out of 80 possible accessories
