Guard
Inner support flange
Nut with two holes
Side handle
Flat-pin spanners
Plastic carry case
Angle grinder
WEV 850-125 (603611520) Angle grinder
Order no.: 603611520
Your Delivery Scope
Guard
Inner support flange
Nut with two holes
- 125 mm // 5 "Disc-Ø
- 850 WRated input power
- 3000 - 11500 rpmNo-load speed
- 2 Nm / 18 in-lbsTorque
- Robust, universal and economical: powerful angle grinder for any application
- Powerful motor with good overload capacity
- Thumbwheel controlled Vario-Constamatic (VC)-Full wave electronics ideal for working on materials requiring customised speeds, and at speeds which remain almost constant under load
- Twist-proof guard
- Electronic overload protection, soft start and restart protection
- Auto-stop carbon brushes to protect the motor
| Disc-Ø | 125 mm // 5 " |
| Rated input power | 850 W |
| Output power | 480 W |
| No-load speed | 3000 - 11500 rpm |
| Speed at rated load | 8500 rpm |
| Torque | 2 Nm / 18 in-lbs |
| Spindle thread | M 14 |
| Handle circumference | 179 mm / 7.063 " |
| Weight (without power cable) | 1.9 kg / 4.2 lbs |
| Cable length | 2.5 m / 8 ft |
| Surface grinding | 8 m/s² |
| Uncertainty of measurement K | 1.5 m/s² |
| Grinding with sandpaper | 2.5 m/s² |
| Uncertainty of measurement K | 1.5 m/s² |
| Sound pressure level | 88 dB(A) |
| Sound power level (LwA) | 99 dB(A) |
| Uncertainty of measurement K | 3 dB(A) |
| Guard |
| Inner support flange |
| Nut with two holes |
| Side handle |
| Flat-pin spanners |
| Plastic carry case |
Accessory
Categories 1
91 out of 91 possible accessories
