Guard
Inner support flange
Nut with two holes
Side handle
Flat-pin spanners
Angle grinder | (110-120 V / 50 - 60 Hz)
WE 1500-150 RT (601242420) Angle grinder | (110-120 V / 50 - 60 Hz)
Order no.: 601242420
Your Delivery Scope
Guard
Inner support flange
Nut with two holes
- 150 mm // 6 "Disc-Ø
- 1500 WRated input power
- 9600 rpmNo-load speed
- 5 Nm / 44.3 in-lbsTorque
- Powerful and robust angle grinder with ergonomic soft handle for low-fatigue working, especially overhead
- Powerful motor with good overload capacity
- Tacho Constamatic (TC) Full-wave Electronics: fast work progress by means of constant speed under load
- Tool-free adjustable guard; twist-proof
- Electronic soft start for smooth start-up
- Restart protection after power interruption
- Auto-stop carbon brushes to protect the motor
| Disc-Ø | 150 mm // 6 " |
| Rated input power | 1500 W |
| Output power | 900 W |
| No-load speed | 9600 rpm |
| Speed at rated load | 9600 rpm |
| Torque | 5 Nm / 44.3 in-lbs |
| Spindle thread | 5/8" - 11 UNC |
| Handle circumference | 138 mm / 5.438 " |
| Weight (without power cable) | 2.4 kg / 5.3 lbs |
| Cable length | 2.5 m / 8 ft |
| Surface grinding | 9 m/s² |
| Uncertainty of measurement K | 1.5 m/s² |
| Grinding with sandpaper | 5.3 m/s² |
| Uncertainty of measurement K | 1.5 m/s² |
| Sound pressure level | 87 dB(A) |
| Sound power level (LwA) | 98 dB(A) |
| Uncertainty of measurement K | 3 dB(A) |
| Guard |
| Inner support flange |
| Nut with two holes |
| Side handle |
| Flat-pin spanners |
Accessory
Categories 1
27 out of 27 possible accessories
