Guard
Inner support flange
Nut with two holes
Side handle
Flat-pin spanners
Angle grinder
W 850-115 (603607000) Angle grinder
Order no.: 603607000
Your Delivery Scope
Guard
Inner support flange
Nut with two holes
- 115 mm // 4 1/2 "Disc-Ø
- 850 WRated input power
- 11500 rpmNo-load speed
- 2 Nm / 18 in-lbsTorque
- Robust, universal and economical: powerful angle grinder for any application
- Powerful motor with good overload capacity
- Twist-proof guard
- Restart protection after power interruption
| Disc-Ø | 115 mm // 4 1/2 " |
| Rated input power | 850 W |
| Output power | 520 W |
| No-load speed | 11500 rpm |
| Speed at rated load | 7000 rpm |
| Torque | 2 Nm / 18 in-lbs |
| Spindle thread | M 14 |
| Handle circumference | 179 mm / 7.063 " |
| Weight (without power cable) | 1.8 kg / 4 lbs |
| Cable length | 2.5 m / 8 ft |
| Surface grinding | 7.5 m/s² |
| Uncertainty of measurement K | 1.5 m/s² |
| Grinding with sandpaper | 2.2 m/s² |
| Uncertainty of measurement K | 1.5 m/s² |
| Sound pressure level | 88 dB(A) |
| Sound power level (LwA) | 99 dB(A) |
| Uncertainty of measurement K | 3 dB(A) |
| Guard |
| Inner support flange |
| Nut with two holes |
| Side handle |
| Flat-pin spanners |
Accessory
Categories 1
88 out of 88 possible accessories
