Guard
Inner support flange
Nut with two holes
Side handle
Flat-pin spanners
Angle grinder | (220-240 V / 50 - 60 Hz)
W 750-115 (603604000) Angle grinder | (220-240 V / 50 - 60 Hz)
Order no.: 603604000
Your Delivery Scope
Guard
Inner support flange
Nut with two holes
- 115 mm // 4 1/2 "Disc-Ø
- 750 WRated input power
- 11500 rpmNo-load speed
- 1.9 Nm / 16.8 in-lbsTorque
- Robust, universal and economical: ergonomic angle grinder for any application
- Robust motor
- Twist-proof guard
- Restart protection after power interruption
| Disc-Ø | 115 mm // 4 1/2 " |
| Rated input power | 750 W |
| Output power | 475 W |
| No-load speed | 11500 rpm |
| Speed at rated load | 7000 rpm |
| Torque | 1.9 Nm / 16.8 in-lbs |
| Spindle thread | M 14 |
| Handle circumference | 180 mm / 7.094 " |
| Weight (without power cable) | 1.8 kg / 4 lbs |
| Cable length | 2.5 m / 8.2 ft |
| Surface grinding | 7.5 m/s² |
| Uncertainty of measurement K | 1.5 m/s² |
| Grinding with sandpaper | 2.5 m/s² |
| Uncertainty of measurement K | 1.5 m/s² |
| Sound pressure level | 94 dB(A) |
| Sound power level (LwA) | 102 dB(A) |
| Uncertainty of measurement K | 3 dB(A) |
| Guard |
| Inner support flange |
| Nut with two holes |
| Side handle |
| Flat-pin spanners |
Accessory
Categories 1
65 out of 65 possible accessories
