Guard
Inner support flange
Nut with two holes
Side handle
Flat-pin spanners
Angle grinder
W 1100-115 (603613000) Angle grinder
Order no.: 603613000
Your Delivery Scope
Guard
Inner support flange
Nut with two holes
- 115 mm // 4 1/2 "Disc-Ø
- 1100 WRated input power
- 12000 rpmNo-load speed
- 3.1 Nm / 27 ft. lbsTorque
- Robust, universal and economical: ergonomic angle grinder for any application
- Powerful motor with good overload capacity
- Twist-proof guard
- Restart protection after power interruption
| Disc-Ø | 115 mm // 4 1/2 " |
| Rated input power | 1100 W |
| Output power | 700 W |
| No-load speed | 12000 rpm |
| Speed at rated load | 7000 rpm |
| Torque | 3.1 Nm / 27 ft. lbs |
| Spindle thread | M 14 |
| Handle circumference | 194 mm / 7 5/8 " |
| Weight (without power cable) | 2.1 kg / 4.6 lbs |
| Cable length | 2.5 m / 8 ft |
| Surface grinding | 7 m/s² |
| Uncertainty of measurement K | 1.5 m/s² |
| Grinding with sandpaper | 2.5 m/s² |
| Uncertainty of measurement K | 1.5 m/s² |
| Sound pressure level | 88 dB(A) |
| Sound power level (LwA) | 99 dB(A) |
| Uncertainty of measurement K | 3 dB(A) |
| Guard |
| Inner support flange |
| Nut with two holes |
| Side handle |
| Flat-pin spanners |
Accessory
Categories 1
88 out of 88 possible accessories
