KFM 18 LTX 3 RF (601754750) Cordless Bevelling Tool

2x18V/5.5Ah LiHD; Charger ASC 30-36 V (110-120 V / ); MetaLoc

Order no.: 601754750 EAN: 4007430293459
Battery pack voltage:
18 V
Max. chamfer height at 45°:
4 mm / 5/32 "
Max. radius:
R3
  • World's first cordless metal bevelling machine for 45° chamfers up to 4 mm and radii of 2 and 3 mm
  • Surfaces free from oxide and burrs as ideal preparation for the application of powder or paint coatings for maximum protection from corrosion
  • One-touch controller: Patented, tool-free setting of the cutting depth in 0.1 steps; stop points for short setting times, and protection against unintentional adjustment of the cutting depth when working
  • Slim cutter head for working on tubes, on drilled holes from Ø 13 mm, and on exterior contours
  • Parallel stop for a uniform finish when processing straight edges
  • LiHD battery pack for ultimate performance, extremely long runtime and service life
  • World's first cordless metal bevelling machine for 45° chamfers up to 4 mm and radii of 2 and 3 mm
  • Surfaces free from oxide and burrs as ideal preparation for the application of powder or paint coatings for maximum protection from corrosion
  • One-touch controller: Patented, tool-free setting of the cutting depth in 0.1 steps; stop points for short setting times, and protection against unintentional adjustment of the cutting depth when working
  • Slim cutter head for working on tubes, on drilled holes from Ø 13 mm, and on exterior contours
  • Parallel stop for a uniform finish when processing straight edges
  • Battery pack can be swivelled for better working in hard to reach places
  • Overload protection: protects the motor from overheating
  • Electronic soft start for smooth start-up
  • Restart protection: prevents unintentional start-up after power supply interruption
  • Detachable dust filter protects motor from coarse particles
  • LiHD battery pack for ultimate performance, extremely long runtime and service life
  • Ultra-M technology: highest performance, gentle charging and 3 years of warranty on the battery pack.
The machine shown may differ in equiment and technical details depending on the configuration.
Kindly pay attention to delivery scope and product description.
Accessories included only if listed in the delivery scope.
Characteristics
Type of battery pack
LiHD
Capacity of battery pack
5.5 Ah
Battery pack voltage
18 V
No-load speed
7000 rpm
Type of edges
Chamfer and radius
Max. chamfer width 45°
6 mm / 1/4 "
Max. chamfer height at 45°
4 mm / 5/32 "
Max. radius
R3
Grading of cutting depth setting
0.1 mm / 0.00394 "
Curves smallest inner Ø
13 mm
Weight (including battery pack)
3.1 kg / 6.8 lbs
Noise emission
Sound pressure level
84 dB(A)
Sound power level (LwA)
95 dB(A)
Uncertainty of measurement K
3 dB(A)
  • 2 Carbide indexable inserts 45° chamfer
  • Guide stop
  • Screwdriver Torx 15
  • Metabo VibraTech (MVT) side handle
  • Dust filter
  • 2 LiHD battery packs (18 V/5.5 Ah)
  • Charger ASC 30-36 V "AIR COOLED"
  • MetaLoc case
  • 2 Carbide indexable inserts radius R2
  • 2 Carbide indexable inserts radius R3
In order to design the website in an optimal manner and to continuously improve it, Metabo uses cookies. If you continue using the website, you agree to the use of cookies. More information