DMH 290 Set (601561500) Air Chipping Hammer

Plastic Carry Case

Order no.: 601561500 EAN: 4007430245878
Bit retainer:
Hexagon shaft 10 mm
Impact rate:
2900 /min
  • For processing of sheet metal and stone
  • Suitable for construction work on masonry, bricks, aerated concrete
  • Kickback damping for reduction of vibrations
  • Long piston stop with higher power transmission and effective operation and rapid work progress
  • User-friendly exhaust guide through the handle avoids dust turbulence in the working area
  • Quick-action chuck: for quick and tool-free change of chisels
  • Rubberised handle for ergonomic and fatigue-free operation
  • Light, handy chipping hammer
  • For processing of sheet metal and stone
  • For work in the car body area
  • Suitable for construction work on masonry, bricks, aerated concrete
  • Ideal for removing plaster and tiles and light mortising work
  • Kickback damping for reduction of vibrations
  • Long piston stop with higher power transmission and effective operation and rapid work progress
  • User-friendly exhaust guide through the handle avoids dust turbulence in the working area
  • Quick-action chuck: for quick and tool-free change of chisels
  • Rubberised handle for ergonomic and fatigue-free operation
Characteristics
Operating pressure
6.2 bar / 90 psi
Air requirement
330 l/min / 12 cfm
Bit retainer
Hexagon shaft 10 mm
Impact rate
2900 /min
Weight
1.7 kg / 3.7 lbs
Vibration
Chiseling
7.25 m/s²
Uncertainty of measurement K
1.22 m/s²
Noise emission
Sound pressure level
94 dB(A)
Sound power level (LwA)
105 dB(A)
Uncertainty of measurement K
3 dB(A)
  • EURO and ARO/Orion plug-in nipple 1/4"
  • Oil bottles
  • Hose nozzle 10 mm and hose clamp according to ISO 11148
  • 3 Chisels
  • Quick-change chuck
  • Plastic carry case
In order to design the website in an optimal manner and to continuously improve it, Metabo uses cookies. If you continue using the website, you agree to the use of cookies. More information